Cogeneration
From Free net encyclopedia
Cogeneration (also combined heat and power or CHP) is the use of a power station to simultaneously generate both heat and electricity. Conventional power plants emit the heat created as a byproduct of electricity generation into the environment through cooling towers, as flue gas, or by other means. CHP captures the excess heat for domestic or industrial heating purposes, either very close to the plant, or - especially in eastern Europe - distributed through steam pipes to heat local housing ("district heating"). This steam can also be used for large air-conditioner units through turning a steam turbine connected to a compressor chilling water sent to the air handler units in a different building.
Contents |
Overview
Thermal power plants (including those that use fissile elements or burn coal, petroleum, or natural gas) do not convert all of their available energy into electricity, with the excess being wasted as excess heat. By capturing the excess heat, CHP allows a more total use of energy than conventional generation, potentially reaching an efficiency of 70-90%, compared with approximately 50% for the best conventional plants. This means that less fuel needs to be consumed to produce the same amount of useful energy.
CHP is most efficient when the heat can be used on site or very close to it. Overall efficiency is reduced when the heat must be transported over longer distances. This requires heavily insulated pipes, which are expensive and inefficient; whereas electricity can be transmitted along a comparatively simple wire, and over much longer distances for the same energy loss.
Cogeneration plants are commonly found in district heating systems of big towns, universities, hospitals, hotels, prisons, oil refineries, paper mills, wastewater treatment plants, thermal enhanced oil recovery wells and industrial plants with large heating needs.
Large or small, most cogeneration projects only produce, more or less, the amount of energy the facility requires. However, thermally enhanced oil recovery (TEOR) plants often produce a substantial amount of excess electricity. After generating electricity, these plants pump leftover steam into heavy oil wells so that the oil will flow more easily, increasing production. TEOR cogeneration plants in Kern County, California produce so much electricity that it cannot all be used locally and is transmitted to Los Angeles.
Types of plant
Topping cycle plants produce electricity first, then the exhaust is used for heating. Bottoming cycle plants, which are rare, produce heat for an industrial process first, then electricity is produced using a waste heat recovery boiler. Bottoming cycle plants are only used when the industrial process requires very high temperatures, such as furnaces for glass and metal manufacturing.
Large cogeneration systems provide heating water and power for an industrial site or an entire town. Common CHP plant types are:
- Gas turbine CHP plants using the waste heat in the flue gas of gas turbines
- Combined cycle power plants adapted for CHP
- Steam turbine CHP plants using the waste heat in the steam after the steam turbine.
Smaller cogeneration units usually use a reciprocating engine or Stirling engine. They use the waste heat in the flue gas and cooling water of gas or diesel engines and replace the traditional gas- or oil-fired boiler (furnace) used in central heating systems.
Some cogeneration plants are fired by biomass [1].
There are also heat-only boiler stations that are dedicated to producing hot water for use in district heating.
MicroCHP
"Micro cogeneration" is a so called distributed energy resource (DER), and is on the scale of one household or small business[2]. Instead of burning fuel to merely heat the house or hot water, some of the energy is converted to electricity in addition to heat. This electricity can be used within the home or business, or (if permitted by the network owner) sold back into the network. Existing MicroCHP installations use three different technologies: internal combustion engines, stirling engines and fuel cells.
See also
External links
- www.mccree.com - Air Products and Chemicals Cogeneration Plant (Orlando, Florida)
- www.co-generationsystems.com - Industrial Co-generation Equipment Provider
- CHP in Germany
www.sunmachine.com- A Range of Domestic MicroCHP plants.
- CHP in Finland:
- High cogeneration performance by innovative steam turbine for biomass-fired CHP plant in Iisalmi, Finland (URL accessed on 30 March 2006)
- UK micro CHP schemes:
- Associations:
de:Blockheizkraftwerk nl:Warmtekrachtkoppeling es:Cogeneración fr:Cogénération ja:コジェネレーション pl:Elektrociepłownia sv:Kraftvärmeverk