Electrical discharge machining
From Free net encyclopedia
Image:Electrical-discharge-machine.jpg
Electrical discharge machining (or EDM) is a machining method primarily used for hard metals or those that would be impossible to machine with traditional techniques. One critical limitation, however, is that EDM only works with materials that are electrically conductive. EDM can cut small or odd-shaped angles, intricate contours or cavities in extremely hard steel and exotic metals such as titanium, hastelloy, kovar, inconel and carbide.
Sometimes referred to as spark machining or spark eroding, EDM is a nontraditional method of removing material by a series of rapidly recurring electric arcing discharges between an electrode (the cutting tool) and the work piece, in the presence of an energetic electric field. The EDM cutting tool is guided along the desired path very close to the work but it does not touch the piece. Consecutive sparks produce a series of micro-craters on the work piece and remove material along the cutting path by melting and vaporization. The particles are washed away by the continuously flushing dielectric fluid.
The EDM process is most widely used by the mold-making tool and die industries, but is becoming a common method of making prototype and production parts, especially in the aerospace and electronics industries in which production quantities are relatively low. Image:Robofil-300-WireCut.jpg Image:Robofil-300-WireCut-examples.jpg There are two main types of EDM machines, ram and wire-cut. In ram EDM, a graphite electrode is machined into the desired shape and fed into the workpiece on the end of a vertical ram. This type of EDM is usually performed submerged in an oil-based dielectric. In Wire-cut EDM, a thin single-strand metal wire, usually brass, is fed through the workpiece. The wire, which is constantly fed from a spool, is held between upper and lower guides. The guides move in the x–y plane, and sometimes the upper guide can also move independently giving rise to transitioning shapes (circle on the bottom square at the top). This gives the wire-cut EDM the ability to be programmed to cut very intricate and delicate shapes. The wire-cut uses water as its dielectric with the water's resistivity and other electrical properties carefully controlled by filters and de-ionizer units.
See also
Template:Metalworking - Milling and machiningde:Funkenerosion
ja:放電加工
sl:Elektroerozija
zh:电火花加工