Exposure (photography)
From Free net encyclopedia
Image:Long Exposure Example.jpg In photography, exposure is the total amount of light allowed to fall on the sensor (photographic film or CCD) during the process of taking a photograph. Exposure is measured in exposure value (EV), with higher values denoting more light.
The "correct" exposure for a photograph is determined by the sensitivity of the sensor used. For photographic film, sensitivity is referred to as film speed and is measured on a scale published by the International Organization for Standardization (ISO). Faster film requires less exposure and has a higher ISO rating. Exposure is controlled in a camera by shutter speed and lens aperture. Slower shutter speeds and greater lens apertures produce greater exposures. The electronics in a digital camera may allow one to adjust the sensitivity of the CCD. ISO numbers are usually used to express this attribute.
An approximately correct exposure will be obtained on a sunny day using ISO 100 film, an aperture of f/16 and a shutter speed of 1/125th of a second. This is called the sunny f/16 rule.
An important principle of exposure is reciprocity. If one exposes the sensor for a longer period, a reciprocally smaller aperture is required to reduce the amount of light hitting the film to obtain the same exposure. For example, the photographer may prefer to make his sunny-16 shot at an aperture of f/5.6 (to obtain a shallow depth of field). As f/5.6 is 3 stops 'faster' than f/16, with each stop meaning double the amount of light, a new shutter speed of (1/125)/(2·2·2) = 1/1000 is needed. Once the photographer has determined the exposure, aperture stops can be traded for halvings or doublings of speed, within limits.
Image:Shutter speed in Greenwich.jpg
The true characteristic of most photographic emulsions is not actually linear, (see sensitometry) but it is close enough over the exposure range of about one second to 1/1000th of a second. Outside of this range, it becomes necessary to increase the exposure from the calculated value to account for this characteristic of the emulsion. This characteristic is known as reciprocity failure. The film manufacturer's data sheets should be consulted to arrive at the correction required as different emulsions have different characteristics.
The Zone System is another method of determining exposure.
Today, most cameras automatically determine the correct exposure at the time of taking a photograph by using a built-in light meter, or multiple point meters interepreted by a built-in computer, see metering mode.
See also
- double exposure
- exposure value
- light value
- sensitometry (and Hurter-Driffield curves)
Helping Links
de:Belichtung (Fotografie) it:Esposizione (fotografia) no:Eksponering pl:Ekspozycja (fotografia) ru:Экспозиция (фотография) fi:Valotus