Harvard Mark I

From Free net encyclopedia

Image:Harvard Mark I Computer - Left Segment.JPG Image:Harvard Mark I Computer - Right Segment.JPG Image:Harvard Mark I Computer - Input-Output Details.JPG

The IBM ASCC (Automatic Sequence Controlled Calculator), called the Mark I by Harvard University Template:Ref, was the first large-scale automatic digital computer in the USA. It is considered to be the first universal calculator.

The electromechanical ASCC was devised by Howard H. Aiken, created at IBM, shipped to Harvard in February 1944, and formally delivered there on August 7, 1944. The main advantage of the Mark I was that it was fully automatic—it didn't need any human intervention once it started. It was the first fully automatic computer to be completed. It was also very reliable, much more so than early electronic computers. It is considered to be "the beginning of the era of the modern computer" and "the real dawn of the computer age".

The building elements of the ASCC were switches, relays, rotating shafts, and clutches. It was built using 765,000 components and hundreds of miles of wire, amounting to a size of 51 feet (16 m) in length, eight feet (2.4 m) in height, and two feet deep. It had a weight of about five short tons (4500 kg). The basic calculating units had to be synchronized mechanically, so they were run by a 50 foot (15 m) shaft driven by a five-horsepower (4 kW) electric motor. The Mark I could store 72 numbers, each 23 decimal digits long. It could do three additions or subtractions in a second. A multiplication took six seconds, a division took 15.3 seconds, and a logarithm or a trigonometric function took over one minute.

The Mark I read its instructions from a punched paper tape and executed the current instruction and then read in the next one. It had no conditional branch instruction. This meant that complex programs had to be physically long. A loop was accomplished by joining the end of the paper tape containing the program back to the beginning of the tape (literally creating a loop). This separation of data and instructions is known as the Harvard architecture. Computing pioneer Grace Hopper was the first programmer for the Mark I.

At the dedication ceremony, Aiken failed to mention the involvement of IBM in designing and building the computer. IBM was not pleased with this, and parted ways with Aiken. IBM named the computer the ASCC but Harvard and Aiken renamed it the Mark I. IBM went on to build the SSEC.

The Mark I was followed by the Harvard Mark II (1947 or 1948), Mark III/ADEC (September 1949), and Harvard Mark IV (1952) – all the work of Aiken. The Mark II was an improvement over the Mark I, but it also used electromechanical relays. The Mark III used some electronic components and the Mark IV was all-electronic, using solid-state components. The Mark III and Mark IV used magnetic drum memory and the Mark IV also had magnetic core memory. The Mark II and Mark III went to the US Navy base at Dahlgren, Virginia. The Mark IV was built for the US Air Force, but it stayed at Harvard.

The Mark I was eventually disassembled, although portions of it remain at Harvard in the Cabot Science Center.

[edit]