Primary rate interface
From Free net encyclopedia
The primary rate interface (PRI) is a telecommunications standard for carrying multiple DS0 voice and data transmissions between two physical locations.
All data and voice channels are (ISDN) and operate at 64 kbit/s.
North America and Japan use a T1 of 23 B channels and one D channel which corresponds to a T1 line. Europe, Australia and most of the rest of the world use the slightly higher capacity E1, which is composed of 30 B channels and one D channel.
Fewer active B channels (also called user channels) can be used for a fractional T1. More channels can be used with more T1's, or with a fractional or full T3 or E3.
See T-carrier for DS0, T1, E1, T3, E3 and other carrier communications terms.
In the Integrated Services Digital Network (ISDN), there are two levels of service: the Basic Rate Interface (BRI), intended for the home and small enterprise, and the Primary Rate Interface (PRI), for larger users. Both rates include a number of B-channels and a D-channel. Each B-channel carries data, voice, and other services. The D-channel carries control and signaling information. The Basic Rate Interface consists of two 64 Kbps B-channels and one 16 Kbps D-channel. Thus, a Basic Rate Interface user can have up to 128 Kbps service. The Primary Rate Interface consists of 23 B-channels and one 64 Kpbs D-channel using a T-1 line or 30 B-channels and 1 D-channel using an E1 line. Thus, a Primary Rate Interface user on a T-1 line can have up to 1.544 Mbps service or up to 2.048 Mbps service on an E1 line. PRI uses the Q.931 protocol over the D-channel.
The Primary Rate Interface channels are carried on a T-carrier system line (in the U.S., Canada, and Japan) or an E-carrier line (in other countries) and are typically used by medium to large enterprises. The 23 (or 30) B-channels can be used flexibly and reassigned when necessary to meet special needs such as videoconferences. The Primary Rate user is hooked up directly to the telephone company central office.
Sources: From Federal Standard 1037C
External links
- Asterisk Telephony wiki PRI [1]