Machine code

From Free net encyclopedia

Machine code or machine language is a system of instructions and data directly understandable by a computer's central processing unit.

Contents 1 Machine code instructions 2 Programs 3 Assembly languages 4 Example 5 See also 6 Further reading

Machine code instructions

The "words" of a machine Instructions are patterns of bits with different patterns corresponding to different commands to the machine.

Every CPU model has its own machine code, or instruction set, although there is considerable overlap between some. If CPU A understands the full language of CPU B it is said that A is compatible with B. CPU B may not be compatible with CPU A, as A may know a few codes that B does not.

Some machine languages give all their instructions the same number of bits, while the instruction length differs in others. How the patterns are organised depends largely on the specification of the machine code. Common to most is the divisionof one field (the opcode) specifies the exact operation (for example "add"). Other fields may give the type of the operands, their location, or their value directly (operands contained in an instruction are called immediate). Some exotic instruction sets do not have an opcode field (such as Transport Triggered Architectures or the Forth virtual machine), only operand(s). Other instruction sets lack any operand fields, such as NOSCs")[1].

Programs

A program is a sequence of instructions that are executed by a CPU. While simple processors execute instructions one after the other, superscalar processors are capable of executing several instructions at once.

Program flow may be influenced by special jump instructions that transfer execution to an instruction other than the following one. Conditional jumps are taken (execution continues at another address) or not (execution continues at the next instruction) depending on some condition.

Assembly languages

Humans use mnemonic codes to refer to machine code instructions. Such a more readable rendition of the machine language is called an assembly language and consists of both binary numbers and simple words whereas machine code is composed only of the two binary digits 0 and 1.

For example, on the Zilog Z80 processor, the machine code 00000101 causes the CPU to decrement the B processor register. In assembly language this would be written as DEC B.

Example

The MIPS architecture provides a specific example for a machine code whose instructions are always 32 bits long. The general type of instruction is given by the op (operation) field, the highest 6 bits. J-type (jump) and I-type (immediate) instructions are fully specified by op. R-type (register) instructions include an additional field funct to determine the exact operation. The fields used in these types are:

   6      5     5     5     5      6 bits
[  op  |  rs |  rt |  rd |shamt| funct]  R-type
[  op  |  rs |  rt | address/immediate]  I-type
[  op  |        target address        ]  J-type

rs, rt, and rd indicate register operands; shamt gives a shift amount; and the address or immediate fields contain an operand directly.

For example adding the registers 1 and 2 and placing the result in register 6 is encoded:

[  op  |  rs |  rt |  rd |shamt| funct]
    0     1     2     6     0     32     decimal
 000000 00001 00010 00110 00000 100000   binary

Loading a value from the memory cell 68 cells after the one register 3 points to into register 8:

[  op  |  rs |  rt | address/immediate]
   35     3     8           68           decimal
 100011 00011 01000 00000 00001 000100   binary

Jumping to the address 1025:

[  op  |        target address        ]
    2                 1025               decimal
 000010 00000 00000 00000 10000 000001   binary

See also

• Turing machine
• CISC
• RISC
• VLIW
• Endianness.

Further reading

• {{cite book

| first = John L.
| last = Hennessy
| authorlink = John L. Hennessy
| coauthors = Patterson, David A.
| title = Computer Organization and Design. The Hardware/Software Interface.
| publisher = Morgan Kaufmann Publishers
| id = ISBN 1-55860-281-X

}}

• {{cite book

| first = Andrew S.
| last = Tanenbaum
| authorlink = Andrew S. Tanenbaum
| title = Structured Computer Organization
| publisher = Prentice Hall
| id = ISBN 0-13-020435-8

}}ca:Llenguatge de màquina cs:Strojový kód da:Maskinkode de:Maschinensprache et:Masinkood es:Lenguaje de máquina fr:Langage machine ko:기계어 it:Linguaggio macchina he:שפת מכונה hu:Gépi kód nl:Machinetaal ja:機械語 no:Maskinkode pl:Kod maszynowy pt:Código de máquina ru:Машинный язык simple:Machine code sl:Strojna koda sk:Strojový kód fi:Konekieli sv:Maskinkod vi:Ngôn ngữ máy uk:Машинний код zh:机器语言