Stoma
From Free net encyclopedia
- This is not about surgically created bowel openings; see stoma (medicine)
Image:SEM leaf (350x).jpg In botany, a stoma (also stomate; plural stomata) is a tiny opening or pore, found mostly on the undersurface of a plant leaf, and used for gas exchange. Air containing carbon dioxide and oxygen enters the plant through these openings where it gets used in photosynthesis and respiration. Waste oxygen produced by photosynthesis in the chlorenchyma cells (parenchyma cells with chloroplasts) of the leaf interior exits through these same openings. Also, water vapor is released into the atmosphere through these pores in a process called transpiration.
Dicotyledons usually have more stomata on the lower epidermis than the upper epidermis. As these leaves are held horizontally, upper epidermis is directly illuminated. Locating fewer stomata on the upper epidermis can then prevent excess water loss.
Monocotyledons are different. Because their leaves are held vertically, they will have the same number of stomata on the two epidermes.
If the plant has floating leaves, there will be no stomata on the lower epidermis as it can absorb gases directly from water through the cuticle. If it is a submerged leaf, no stomata will be present on either side.
Stoma in Greek means "mouth".
Contents |
Stomata control the trade-off between carbon gain and water loss
As the key reactant in photosynthesis, carbon dioxide, is found in the atmosphere, most plants require the stomata to be open during daytime. The problem is that the air spaces in the leaf are saturated with water vapor, which exits the leaf through the stomata (this is known as transpiration). Therefore, plants cannot gain carbon dioxide without simultaneously losing water vapor.
Two alternative approaches have evolved to deal with the carbon/water tradeoff
Ordinarily, carbon dioxide is fixed to ribulose-1,5-bisphosphate (RuBP) by the enzyme "Rubisco" in mesophyll cells exposed directly to the air spaces inside the leaf. This exacerbates the carbon/water tradeoff for two reasons: first, Rubisco has a relatively low affinity for carbon dioxide, and second, it fixes oxygen to RuBP, wasting energy and carbon in a process called photorespiration. For both of these reasons, Rubisco needs high carbon dioxide concentrations, which means high stomatal apertures and consequently high water loss.
However, plants possess another enzyme that can also fix carbon dioxide: PEP carboxylase or PEPCase. This enzyme has high carbon dioxide affinity, so a given rate of carbon dioxide fixation can be achieved with less stomatal opening, and hence less water loss. The catch is that the products of carbon fixation by PEPCase must be converted in an energy-intensive process to continue through the carbon reactions of photosynthesis. As a result, the PEPCase alternative is only preferable where water is more limiting but light -- which provides the energy in this case -- is plentiful, and/or where high temperatures increase the solubility of oxygen relative to that of carbon dioxide, magnifying Rubisco's oxygenation problem.
CAM plants open stomata at night
A group of mostly desert plants called "CAM" plants (Crassulacean acid metabolism, after the family Crassulaceae, which includes the species in which the CAM process was first discovered) open their stomata at night (when water evaporates more slowly from leaves for a given degree of stomatal opening), use PEPCase to fix carbon dioxide and store the products in large vacuoles. The following day, they close their stomata and release the carbon dioxide fixed the previous night into the presence of Rubisco. This saturates Rubisco with carbon dioxide, allowing minimal oxygenation. This approach, however, is severely limited by the capacity to store fixed carbon in the vacuoles, so it is preferable only when water is severely limiting,
C4 plants
Another group of plants, known as C4 plants, open their stomata in the day, but take advantage of PEPCase by having two different types of mesophyll cells: "bundle sheath" cells containing PEPCase and exposed to the air spaces in the leaf, and ordinary mesophyll cells containing Rubisco but isolated from the air spaces. Carbon dioxide is fixed by PEPCase in the bundle sheath cells, permitting lower stomatal apertures and less water loss, and then shuttled to the cells with Rubisco. This allows greater rates of photosynthesis than CAM plants, but still requires plenty of light to provide energy to drive the first steps after fixation of carbon dioxide by PEPCase.
Stomatal opening and closure
Image:SEM leaf (2900x).jpg However, most plants do not have the above-said facility and must therefore open and close their stomata during the daytime in response to changing conditions, such as light intensity, humidity, and carbon dioxide concentration. It is not entirely certain how these responses work. However, the basic mechanism involves regulation of osmotic pressure.
When conditions are conducive to stomatal opening (e.g., high light intensity and high humidity), a proton pump drives protons (H+) from the guard cells. This means that the cells' electrical potential becomes increasingly negative, and so an uptake of potassium ions (K+) occurs. This in turn increases the osmotic pressure inside the cell, drawing in water through osmosis. This increases the cells' volume and turgor pressure. Then, because the wall of the guard cell facing the stomatal pore is less elastic (more rigid) than the wall on the opposite side of the cell, the two guard cells bow apart from one another, creating an open pore through which gas can move.
When the roots begin to sense a water shortage in the soil, abscisic acid (ABA) is released. ABA binds to certain receptors in the guard cells' plasma membranes, which first raises the pH of the cytosols in the cells. This causes the chlorine (Cl-) and inorganic ions to exit the cells. Second, it causes the release of calcium ions (Ca2+) from the cells' vacuoles in to the cytosols, which blocks the uptake of any further K+ into the cells. The loss of these solutes causes a reduction in osmotic pressure, thus making the cell flaccid and so closing the stomatal pores.
Viewing stomata
Image:Graticule.png The easiest way to view stomata on a leaf is to take a nail varnish impression of it.
- Paint about one square centimeter of the underside of the leaf with transparent nail varnish.(or thin layer of PVA glue)
- Allow to dry out thoroughly (shouldn't take more than 15 minutes).
- Peel off and place on a microscope slide.
The stomata leave clearly visible impressions in the nail varnish. A graticule slide allows for the counting of how many stomata (per unit area) are on the leaf surface, a characteristic of physiological significance
Inferring stomatal behavior from gas exchange
Another way to find out whether stomata are open or closed, or more accurately, how open they are, is by measuring leaf gas exchange. A leaf is enclosed in a sealed chamber and air is driven through the chamber. By measuring the concentrations of carbon dioxide and water vapor in the air before and after it flows through the chamber, one can calculate the rate of carbon gain (photosynthesis) and water loss (transpiration) by the leaf.
However, because water loss occurs by diffusion, the transpiration rate depends on two things: the gradient in humidity from the leaf's internal air spaces to the outside air, and the diffusion resistance provided by the stomatal pores. Stomatal resistance (or its inverse, stomatal conductance) can therefore be calculated from the transpiration rate and humidity gradient. (The humidity gradient is the humidity inside the leaf, determined from leaf temperature based on the assumption that the leaf's air spaces are saturated with vapor, minus the humidity of the ambient air, which is measured directly.) This allows scientists to learn how stomata respond to changes in environmental conditions, such as light intensity, humidity, or carbon dioxide concentration.da:Spalteåbning (plantedel) de:Stoma (Botanik) es:Estoma eo:Stomo fr:Stomate he:פיונית lt:Žiotelė nl:Huidmond zh:气孔