Slot 1
From Free net encyclopedia
(Difference between revisions)
Revision as of 06:20, 17 April 2006
YurikBot (Talk | contribs)
robot Adding: [[es:Slot 1]] Removing: [[en:Slot 1]]
Next diff →
YurikBot (Talk | contribs)
robot Adding: [[es:Slot 1]] Removing: [[en:Slot 1]]
Next diff →
Current revision
Slot 1 refers to the physical and electrical specification for the connector used by some of Intel's microprocessors, including the Celeron, Pentium II and the Pentium III.
Slot 1 was a departure from the square ZIF PGA/SPGA sockets used for the Pentium and earlier processors. Instead, the processor is mounted on a Single Edge Connector Cartridge (SECC), much like a PCI slot, but with a 242-lead edge-connector.
The Slot 1 specification allows for higher bus rates than Socket 7. Slot 1 motherboards use the GTL+ bus protocol.
See also: Slot 2, Slot A, List of Intel CPU slots and sockets.
[edit]
