4-8-2

From Free net encyclopedia

Under the Whyte notation for the classification of steam locomotives, a 4-8-2 locomotive has four leading wheels (generally arranged in a leading truck), eight coupled driving wheels and two trailing wheels (often but not always in a trailing truck).

The equivalent UIC classification is 2'D1'.

1 The first 4-8-2
2 North America
3 European use
4 African Use
5 Sources

[edit]

The first 4-8-2

Contrary to popular belief, the 4-8-2 design originated in New Zealand, not the United States. The design was an obvious progression from the 4-6-2 "Pacific" type that had originated in New Zealand in 1901 with the Q class, and the first 4-8-2 was built in the New Zealand Railways' Addington Workshops in Christchurch in 1908. Designated as the X class, it was designed to haul heavy freight trains on the mountainous central section of the North Island Main Trunk Railway. It is possible that this was the source of the "Mountain" nickname that was applied to the 4-8-2 type, though it is often said the name originates from the Chesapeake and Ohio Railroad in the United States, who named the type "Mountain" after the Allegheny Mountains their first 4-8-2s were built to tackle.

One member of the pioneering X class survives and is currently located at the depot of the Feilding and District Steam Rail Society.

[edit]

North America

The 4-8-2 was most popular on the North American continent, where Pacifics were becoming over-burdened as passenger trains grew in length and weight. The first North American 4-8-2 locomotives were built by ALCO for the Chesapeake and Ohio Railroad in 1911. ALCO combined the traction of the eight-drivered 2-8-2 "Mikado" with the excellent tracking qualities of the Pacific's four-wheel leading truck.

Although the C&O intended their new Mountains for passenger service, the type proved ideal for the new, faster freight service the railroads were introducing. Many 4-8-2s were built for dual service.

Mountain type locomotives were built for 41 American railroads; approximately 2200 were built. The largest users were the New York Central Railroad with 435 of what they named the Mohawk type (the Water Level Route had no need for "Mountains", after all!); the Pennsylvania Railroad with 224 class M1 and M1a locomotives, used mostly for fast freight service; the Florida East Coast with 90 passenger locomotives; the New Haven with 70; and the Southern Railway with 58.

[edit]

European use

Outside of the United States locomotives of this type were rarer. Britain's population of Mountains consists entirely of two 15 inch (381 mm) gauge locomotives on the Romney, Hythe and Dymchurch Railway, though a number of double-Mountain (4-8-2+2-8-4) Garratts were built for export.

In France, these locomotives (known as the 241 type) were rather more common.

Spain saw over 200 of these locomotives, also known as a 2-4-1, in five classes.

The Czech railways also employed a design of 4-8-2.

[edit]

African Use

The South African Railways (SAR/SAS) employed a wide variety of classes of locomotives with this wheel arrangement; in fact, locomotives with this wheel arrangement were the mainstay of the fleet. SAR also utilised a large number of 4-8-2+2-8-4 garratts.

[edit]