Bicycle wheel
From Free net encyclopedia
Image:Bicycle wheel.jpgA bicycle wheel is a wheel designed for a bicycle. A pair is often called a wheelset, especially in the context of ready built "off the shelf" performance-oriented wheels. A wheel consists of a rim connected to the hub by spokes. At the end of each wheel spoke is a nut, called a nipple. Bicycle wheels connect to the frame and fork via dropouts.
The hub uses bearings to reduce friction with the axle. Except in fixed gear bicycles, the rear hub is connected to the freewheel and the rear sprockets. Some bicycle wheels are attached using a quick release for ease of removal from the bicycle.
The rim is an extrusion that is butted into itself to form a circle. Most bicycle rims are for clichers but some are for tubulars. Material (in order of decreasing cost) may be carbon fiber, aluminum or steel. Unless the rim has no holes for spokes, the number of spoke holes must match the number of spoke holes in the hub. Some Campagnolo road rims and the Velocity Zvino MTB rims have no spoke holes.
Bicycle wheels come in many different sizes. Most road and racing bicycles use 700C wheels (approximately 700 mm diameter with a tire mounted) due to regulation, while many mountain bikes use 26 inch wheels. Some mountain bikes use 24 inch or 29 inch wheels (29 inch wheels are in fact identical in diameter to 700C road wheels). Some bicycles designed for triathlon or time trial purposes use 650c wheels. BMX bikes typically use 20 inch wheels, and some use 24 inch wheels.
Bicycle wheels can also be categorized according to the way in which the tire or tyre attaches to the wheel. A tubular wheel uses adhesive to attach the tubular tire onto the rim. A clincher wheel uses a metal hook around the rims that clinches the tire with a separate inner tube inside the tire. While tubular wheels are lighter, and can be made to operate in a wider range of tire pressures, clincher wheels are easier to service, for example in the case of a punture. However, tubulars are popular for bicycle road racing applications and it is argued that it is safer than clinchers in the case of a punture while the bicycle is traveling at high speeds.
Contents |
Road/racing bicycle wheels
Image:Laufrad-campa-vento.jpg For road bicycle racing performance there are several factors which are generally considered the most important:
- weight (for this article equivalent to mass)
- rotational inertia
- aerodynamics
- hub/bearing smoothness
- stiffness
Semi-aerodynamic and aerodynamic wheelsets are now commonplace for road bicycles. Aluminum rims are still the most common, but carbon fiber is also becoming popular. Carbon fiber is also finding use in hub shells to reduce weight, although some argue that its proximity to the center of rotation means that it is less useful than reducing rim weight.
Semi-aerodynamic and aerodynamic wheelsets are characterized by greater rim depth, which is the distance between the outermost and the innermost surfaces of the rim, a triangular or pyramidal cross-section and by fewer numbers of spokes, or no spokes at all--with blades molded of composite material supporting the rim. The spokes are also often flattened in the rotational direction to reduce wind drag. These are called bladed spokes. However, semi-aerodynamic and aerodynamic wheelsets tend to be heavier than more traditional spoked wheelsets due to the extra shapings of the rims and spokes. More importantly, the rims must be heavier when there are fewer spokes, as the unsupported span between spokes is greater. While the increase in weight is somewhat important, it is the increased rotating inertia which is the greatest problem for "aero" wheels, as the rim, being farther from the axis of rotation, has the largest effect on rotational inertia, or in other words, moving 20 grams from the spokes (fewer spokes) to the rim will keep the weight the same, but will increase the rotational inertia. They are also more difficult to control in a "cross-wind" condition due to the larger projected lateral area. The tradeoff between rim depth, weight and spoke count is still under debate. However a number of wheel manufacturers are now producing wheels with roughly half the spokes of a top of the line traditional wheel from the 1980's, with approximately the same rotational inertia and less total weight. These improvements have been made possible primarily through improved aluminum alloys for the rims.
Almost all clincher carbon fiber wheelsets, such as those made by Zipp and Mavic, still use aluminum parts at the clinching part of the rim. One exception to this is the Campagnolo Hyperon Ultra clincher wheelset, in which the rims are entirely made from carbon fiber.
Mountain bike wheels
26-inch/ISO 559
26-inch clincher tires (with inner tubes) are the most common wheel size for mountain bikes. The typically 26er rim has a diameter of 22.0" (559mm) and an outside tire diameter of about 26.2" (665mm) Increasingly tubeless tires are becoming more popular. Tubeless tires are often called by the acronym UST. UST tires allow the rider to run lower tire pressures for better traction and shock absorption without risking puncturing the tube in conventional bicycle tires.
29-inch/ISO 622
Template:Main 29-inch wheels are becoming more popular for mountain bikes. The rims have a diameter of approximately 24.5" (622mm), the same as 700c rims used on most road, hybrid and touring bicycles. The average 29" mountain bike tire has an outside diameter of about 28.5" (724mm). There are advantages and disadvantages associated with this change discussed in detail in the main article.
See also
External links
- Building Bicycle Wheels by Sheldon Brown
- Mavic - a major manufacturer of bicycle wheels.
- Velocity USA - manufacturer of aftermarket bicycle wheels.de:Laufrad (Fahrrad)