Commodore VIC-20
From Free net encyclopedia
The VIC-20 (Germany: VC-20; Japan: VIC-1001) was an 8-bit home computer, made by Commodore Business Machines, with 5 KB RAM and a MOS 6502 CPU. The machine's external design was later used by the Commodore 64 and C16. The VIC-20 was released in June 1980, about 3 years after Commodore's first personal computer, the PET.
Contents |
History
Origin, marketing
The VIC-20 was intended to be more of a low-end home computer than the PET. The VIC-20's video chip, the MOS Technology VIC was a general-purpose color video chip designed by Al Charpentier in 1977 and intended for use in inexpensive display terminals and game consoles, but Commodore couldn't find a market for the chip. With Apple II gaining momentum with the advent of VisiCalc in 1979, Jack Tramiel wanted a product out that would compete in the same segment, to be presented at the January 1980 CES. For this reason Chuck Peddle and Bill Seiler started to design a computer named TOI (The Other Intellect).
The TOI computer failed to materialize, much due to the fact that it required an 80-column character display which in turn required the MOS Technology 6564 chip, which could not be used since it required very expensive static RAM memory to operate fast enough. In the meantime, freshman engineer Robert Yannes at MOS Technology (then a part of Commodore) had designed a computer in his home dubbed the MicroPET and finished a prototype with some help from Al Charpentier and Charles Winterble. When Jack Tramiel was confronted with this prototype he immediately said he wanted it to be finished and order it to be mass produced following a limited demonstration on the CES, since the TOI had not yet been finished.
The very hackish prototype produced by Yannes had very little of the features required for a real computer, so Robert Russell at Commodore headquarters had to coordinate and finish large parts of the design under the codename Vixen. The parts contributed by Russell included a port of the operating system (kernel and BASIC intepreter) taken from John Feagans design for the Commodore PET, a character set with the characteristic PETSCII, an Atari 2600-compatible joystick interface and the cartridge port. The serial IEEE 488-derivative interface was designed by Glen Stark. Some features, like the memory add-in board, were designed by Bill Seiler. At the time, Commodore had an oversupply of 1Kbit×4 SRAM chips, so Tramiel demanded that these be used in the new computer. The end result is arguably closer to the PET or TOI computers than to Yannes prototype, albeit with a 22-column VIC chip instead of the custom chips designed for the more ambitious computers.
While the PET was sold through authorized dealers, the VIC-20 primarily sold at retail, especially discount and toy stores, where it could compete more directly with game consoles. Commodore took out advertisements featuring actor William Shatner of Star Trek fame as its spokesman, asking, "Why buy just a video game?".
Although the VIC-20 was criticized in print as being underpowered, the strategy worked: it became the first computer to sell more than 1 million units and was the best-selling computer of 1982. At its peak, 9,000 units per day were produced, and a total of 2.5 million units were sold before it was discontinued in January 1985, when Commodore repositioned the C64 as its entry-level computer due to the forthcoming release of the C128 and Amiga (the latter taking Commodore into the 16-bit world).
Applications
Because of its small memory and low-resolution display compared to some other computers of the time, the VIC-20 was primarily used for educational software and games. However, productivity applications such as home finance programs, spreadsheets, and communication terminal programs were also made for the machine. Its high accessibility to the general public meant that quite a few software developers-to-be cut their teeth on the VIC-20, being introduced to BASIC programming, and in some cases going further to learn assembly or machine language. Several computer magazines sold on newsstands, such as Compute! and CBM-produced publications, offered programming tips and type-in programs for the VIC-20. Many VIC users learned to program by entering, studying, running, and modifying these type-ins.
The ease of programming the VIC and availability of an inexpensive modem combined to give the VIC a sizeable library of public domain and freeware software, although much smaller than that of the C64. This software was distributed on online services such as CompuServe, BBSs, and via user groups.
As for commercial software offerings, an estimated 300 titles were available on cartridge, and another 500+ titles were available on tape. By comparison, the Atari 2600, the most popular of the video game consoles at the time, had a library of about 900 titles. Cartridge games were ready to play as soon as VIC-20 was turned on, as opposed to games on tape which required loading. Titles on cartridge included Gorf, Cosmic Cruncher, Sargon II Chess, and many others.
Description
Basic features
The VIC-20 had proprietary connectors for program/expansion cartridges and a tape drive (PET-standard Datassette). It came with 5 KB RAM, but 1.5 KB were used by the system for various things, like the video display (which had a rather unusual 22×23 char/line screen layout), and other dynamic aspects of the ROM-resident BASIC interpreter and KERNAL (a low-level operating system). Thus, 3.5 KB of BASIC program memory for code and variables was available to the user of an unexpanded machine.
The computer also had a serial bus (a serial version of the PET's IEEE-488 bus) for daisy chaining disk drives and printers; a TTL-level "user port" with RS-232 and Centronics signals (most frequently used as RS-232, for connecting a modemTemplate:Ref); and a single DE-9 game controller port, compatible with the digital joysticks and paddle (game controller)s used with Atari 2600 videogame consoles and, later, the C64 (the use of a standard port ensured ample supply of Atari-manufactured and other third-party joysticks; Commodore itself offered an Atari joystick under the Commodore brand.
Importantly, like most video game consoles at the time the VIC had a cartridge port to allow for plug-in cartridges with games and other software as well as for adding memory to the machine. Port expander boxes were available from Commodore and other vendors to allow more than one cartridge to be connected at a time.
Memory expansion
The VIC-20's RAM was expandable with plug-in cartridges using the same expansion port as programs. RAM cartridges were available in several sizes: 3K (with or without an included BASIC extension ROM), 8K, 16K, 32K and 64k; the last two only from third-party vendors. The internal memory map was reorganised with the addition of each size cartridge, leading to the situation that some programs would only work if the right amount of memory was present (to cater for this, the 32K cartridges had switches to allow the RAM to be enabled in user-selected sections).
The most visible part of memory that was reorganised with differing expansion memory configurations was the video memory (with text and/or graphics display data). This was because the free memory had to remain contiguous for the BASIC interpreter to be able to use it. An unexpanded VIC had 1K of system memory, followed by a 3K "hole", then 4K of contiguous user memory up to address 8191. The 3K cartridge would fill the "hole", so on unexpanded and +3K VICs the video area was placed at the top of user memory (8K - 512). If an 8K or 16K cartridge was added instead, this memory appeared at addresses above 8K; the video memory was then placed at the start of user memory at 4K, just above the "hole", to provide the maximum amount of contiguous user memory.
The 64k expansion could be reconfigured on the fly to emulate every other memory expansion and thus dramatically increased softwaresupport. Also you could copy images of ROMs to RAM. The more advanced versions contained an 80 character video chip and a patched basic which gave access to 48kByte of memory and to 80 columns video. As those version where released only in late 1984 and mostly in germany they went by mostly unnoticed.
The VIC's names
- The name "VIC" came from the Video Interface Chip, which, despite its designation, also handled all the sound synthesis in the VIC-20. The VIC chip's successor, the graphics-and-RAM-refresh VIC-II, was used to great success in Commodore's later best-selling machine, the C64, and also in the dual video output C128 for that computer's 40-column/composite video graphics.
- The VIC-20 was originally meant to be called Vixen, but this name was inappropriate in Germany, Commodore's second most important market, because it sounds like wichsen, the German language word for "masturbate". VIC, which was subsequently chosen, has a similar problem—it can be pronounced like fick[en], the German word for "fuck". Therefore the VIC-20 was finally marketed as the VC-20 "Volkscomputer" in German-language countries—an obvious pun on "Volkswagen".
VIC trivia
- BASIC programs running on a fully expanded VIC-20 could use at most 24K RAM. Any extra occupied the memory space used by ROM cartridges, i.e. commercial software like games and other applications. This allowed people to copy cartridges to tape and distribute them to their friends, who could then load the tape into the top 8K of their 32K RAM packs.
- An anecdotal bit of evidence to support Commodore's statement that the VIC-20 could be used not only for games but also as a serious introduction to computing, can be said to originate in the fact that a young Linus Torvalds was given a VIC-20 as his first computer. Torvalds later upgraded to a Sinclair QL, then to a 386 PC. Torvalds later went on to write the Linux operating system kernel.
Notes
- Template:Note The Commodore VICModem and later models connected directly to the user port's edge connector. But in order to connect the VIC to industry-standard modems and other RS-232 devices, the user needed to purchase a separate TTL-to-RS232 voltage converter box (standard TTL voltages lie between 0 and 5 V, while RS-232 uses +/- 12 V).
See also
- Screenshots of Commodore VIC-20 games
- List of Commodore VIC-20 games
- Commodore 64
- List of home computers
- PETSCII
- Super Expander
References
- Bagnall, Brian: On The Edge: The Spectacular Rise and Fall of Commodore, ISBN 0-9738649-0-7.
- Finkel, A.; Harris, N.; Higginbottom, P.; Tomczyk, M. (1982). VIC 20 Programmer's reference guide. Commodore Business Machines, Inc. and Howard W. Sams & Co, Inc. ISBN 0-672-21948-4.
- Jones, A. J.; Coley, E. A.; Cole, D. G. J. (1983). Mastering the VIC-20. Chichester, UK: Ellis Horwood Ltd. and John Wiley & Sons, Inc. ISBN 0-471-88892-3.
- Tomczyk, Michael (1984). The Home Computer Wars: An Insider's Account of Commodore and Jack Tramiel. COMPUTE! Publications, Inc. ISBN 0-942386-75-2.
External links
- Denial - the Commodore VIC-20 Community
- OLD-COMPUTERS.COM online-museum VIC-20 page
- Commodore VIC-20 Tribute Page, by Rick Melick
- Archive.org commercial for the VIC-20 featuring William Shatner Full length version of same commercial
- This article was originally based on material from the Free On-line Dictionary of Computing, which is licensed under the GFDL.
| Image:CBM Logo.svg List of Commodore microcomputers |
|
MOS Technology 6502-based (8-bit): MOS/CBM KIM-1 |
PET/CBM |
CBM-II (aka B/P series) |
VIC-20/VC-20 |
C64 |
SX-64 |
C16 & 116 |
Plus/4 |
C128 M68K-based (16/32-bit): Amiga 1000 | Amiga 500 | Amiga 2000 | [[Amiga 500+]] | Amiga 2500 | Amiga 3000, UX, T | Amiga 600 | Amiga 1200 | Amiga 4000 |
