Musical notation

From Free net encyclopedia

Music notation is a system of writing for music. The term sheet music is used for written music to distinguish from audio recordings. In sheet music for ensembles, a score shows music for all players together, while parts contain only the music played by an individual musician. A score can be constructed (laboriously) from a complete set of parts and vice versa.

Present day standard music notation is based on a five-line staff with symbols for each note showing duration and pitch in twelve tone equal temperament. Pitch is shown using the diatonic scale, with accidentals to allow notes on the chromatic scale, and duration is shown in beats and fractions of a beat.



There is some evidence that a kind of musical notation was practiced by the Egyptians from the 3rd millennium BC and by others in Asia since ancient times. India in particular has had a long history of sophisticated musical notation. Musical treatises have appeared througout Indian history, going all the way back to the Vedas composed from around 1500 BC to 500 BC. Indian musical notaton known as sawr lipi has existed in India from the ancient Vedic era upto the modern era.

The Indian scholar and musical theorist Pingala (c. 3rd century BC), in his Chanda Sutra, devised the first scientific form of musical notation by using a binary numeral system to represent long and short syllables to classify 16 different meters of four syllables. He also used the meru-prastara (Pascal's triangle) to represent the different combinations and variations of sounds, and used the binomial theorem to detect the quality of the metres. He used this binary code as a form of musical notation in the same way that Morse code was later used as a form of alphabetic notation over 2000 years later.

Ancient Greece also had a sophisticated form of musical notation, which was in use from at least the 6th century BC until approximately the 4th century AD; many fragments of compositions using this notation survive. The notation consists of symbols placed above text syllables. An example of a complete composition — indeed the only surviving complete composition using this notation — is the Seikilos epitaph, which has been variously dated between the 2nd century BC to the 1st century AD. The Delphic Hymns, dated to the 2nd century BC, also use this notation, but they are not completely preserved (see photograph). Knowledge of the ancient Greek notation was lost around the time of the fall of the Roman Empire. Image:Delphichymn.jpg Scholar and music theorist Isidore of Seville, writing in the early 7th century, famously remarked that it was impossible to notate music. By the middle of the 9th century, however, a form of notation began to develop in monasteries in Europe for Gregorian chant, using symbols known as neumes; the earliest surviving musical notation of this type is in the Musica disciplina of Aurelian of Réôme, from about 850. There are scattered survivals from the Iberian peninsula before this time of a type of notation known as Visigothic neumes, but its few surviving fragments have not yet been deciphered.

Other types of notation date from the 10th century in China and Japan. In East Asia, and elsewhere in Asia, music was notated with the use of characters for sounds. Rhythmic motifs could also be prescribed in a similar way. In Europe on the other hand, the foundations were laid for a purely symbolic notation of music, which does not seem to have existed anywhere else except India.

The founder of what is now considered the standard music stave was Guido D'Arezzo, an Italian Benedictine monk who lived from 995-1050 A.D. His revolutionary method, combining a 4 line stave with the first form of notes known as 'neumes', eventually paved the way to the five line stave which was introduced in the 14th century. Guido D'Arezzo's achievements paved the way for the modern form of written music, music books and the modern concept of a composer.

Standard notation described

Elements of the staff

A staff (in British English, also stave) is generally presented with a clef, which indicates the particular range of pitches encompassed by the staff. A treble clef placed at the beginning of a line of music indicates that the lowest line of the staff represents the note E above middle C, while the highest line represents the note F one octave higher. Other common clefs include the bass clef (second G below middle C to A below middle C), alto clef (F below middle C to G above middle C) and tenor clef (D below middle C to E above middle C). These last two clefs are examples of C clefs, in which the line pointed to by the clef should be interpreted as a middle C. In a similar fashion, the treble clef points to a G and the bass clef points to an F.

In early music, the clef was written as a letter and its location on the staff was chosen by the writer. The treble clef and bass clef used today are stylized versions of the letters G and F, respectively. Their locations are now standardized. Unusual clefs are used for certain requirements, such as tenor parts in choral music.

Following the clef, the key signature on a staff indicates the key of the piece by specifying certain notes to be held flat or sharp throughout the piece, unless otherwise indicated. The key signature is presented in the order of the circle of fifths, with flats B-E-A-D-G-C-F and sharps in the opposite order, F-C-G-D-A-E-B.

Another common element of a staff is the time signature, which indicates the rhythmic characteristics of the piece. Time signatures generally consist of two numbers; the upper number indicates the number of beats per measure (or "bar"), while the lower indicates what sort of note constitutes a "beat". A time signature of 4/4 (also known as "common time" and sometimes indicated with a large "C" symbol) implies that there will be four beats per measure, with each beat constituting a quarter note. A signature of 2/2 (or "cut time", a "C" with a vertical slash) allows 2 beats per measure, with each half note lasting a beat. This is important, because the first beat of each bar is generally stressed. Less commonly, music that lacks rigid rhythmic organization is written without a time signature.

Notes representing a pitch outside of the scope of the five line staff can be represented using leger lines, which provide a single note with additional lines and spaces. Octave (8va) notation is used, particularly for keyboard music, where notes are substantially above or below the staff.

Multiple staves can be grouped together to form a staff system. A system is used where two staves are required to cover the range of the instrument (as with a keyboard instrument), or where multiple related instruments are played (as with three violin parts on a score). A score for ensemble music includes multiple systems, as does most organ music (where the pedals are written as a separate system).

Various directions to the player regarding matters such as tempo and dynamics are added above or below the staff, often in Italian (sometimes abbreviated). For vocal music, lyrics are written.

Here is a sample illustrating some common musical notation.

Image:Audiobutton.png Listen to this piece

Development of music notation

Template:Seealso The earliest known music notation was encoded in cuneiform script in the region of Mesopotamia, with surviving examples dating as far back as the middle of the second millennium B.C.E. Later civilizations, most notably that of Ancient Greece, developed their own forms of notation, which were often written on sheets or scrolls of papyrus.

The ancestors of modern symbolic music notation originated in the Catholic church, as monks developed methods to put plainchant (sacred songs) to paper. The earliest of these ancestral systems, from the 8th century, did not originally utilise a staff, and used neum (or neuma or pneuma), a system of dots and strokes that were placed above the text. Although capable of expressing considerable musical complexity, they could not exactly express pitch or time and served mainly as a reminder to one who already knew the tune, rather than a means by which one who had never heard the tune could sing it exactly at sight.

To address the issue of exact pitch, a staff was introduced consisting originally of a single horizontal line, but this was progressively extended until a system of four parallel, horizontal lines was standardised on. The vertical positions of each mark on the staff indicated which pitch or pitches it represented (pitches were derived from a musical mode, or key). Although the 4-line staff has remained in use until the present day for plainchant, for other types of music, staffs with differing numbers of lines have been used at various times and places for various instruments. The modern system of a universal standard 5-line staff was first adopted in France, and became widely used by the 16th century (although the use of staffs with other numbers of lines was still widespread well into the 17th century).

Because the neum system arose from the need to notate songs, exact timing was initially not a particular issue as the music would generally follow the natural rhythms of the Latin language. However, by the 10th century a system of representing up to four note lengths had been developed. These lengths were relative rather than absolute, and depended on the duration of the neighboring notes. It was not until the 14th century that something like the present system of fixed note lengths arose. Starting in the 15th century, vertical bar lines were used to divide the staff into sections. These did not initially divide the music into measures of equal length (as most music then featured far fewer regular rhythmic patterns than in later periods), but appear to have been introduced as an aid to the eye for "lining up" notes on different staves that were to be played or sung at the same time. The use of regular measures became commonplace by the end of the 17th century.

It is worth noting that standard notation was originally developed for use with voice. Proponents of other systems claim that standard notation is less than ideally suited to instrumental music.

Symbols used in modern musical notation


Notes (in decreasing length) Image:Music notes.png
Rests (in decreasing length) Image:Music rests.png
Clefs Image:Music clefs.png

See also: Da capo, Dal Segno, Coda, Fermata, Accent.

Terms for note durations in American and British English:

Note values
relative duration American British
8 double whole note breve
4 whole note semibreve
2 half note minim
1 quarter note crotchet
1/2 eighth note quaver
1/4 sixteenth note semiquaver
1/8 thirty-second note demisemiquaver
1/16 sixty-fourth note hemidemisemiquaver
1/32 hundred twenty-eighth note quasihemidemisemiquaver
or semihemidemisemiquaver

In U.S. parlance, semibreve and minim are used only in discussions of early music; whole note and half note are used in other contexts. The breve is rarely used in baroque and later eras. When it appears, it is written as oo or |O|.


According to Philip Tagg (1979, p.28-32) and Richard Middleton (1990, p.104-6) musicology and to a degree European-influenced musical practice suffer from a 'notational centricity', "a methodology slanted by the characteristics of notation."

"Musicological methods tend to foreground those musical parameters which can be easily notated...they tend to neglect or have difficulty with parameters which are not easily notated", such as Fred Lerdahl. "Notation-centric training induces particular forms of listening, and these then tend to be applied to all sorts of music, appropriately or not."

Notational centricity also encourages "reification: the score comes to be seen as 'the music', or perhaps the music in an ideal form."

Other notation systems

Figured bass


Figured bass notation originated in baroque basso continuo parts. It is also used extensively in accordion notation, and for jazz. For continuo and jazz parts, it implies improvisation by the performer; for accordion, it is used to notate the bass button to be used.

Shape note


The shape note system is found in some church hymnals, sheet music, and song books, especially in the American south. Instead of the customary elliptical note head, note heads of various shapes are used to show the position of the note on the major scale. Sacred Harp is one of the most popular tune books using shape notes.

Popular music

Fake books (and the Real Books) utilize standard notation, but with key signatures only on the beginning stave, for the melodic line with letter notation for chord names, chord symbols, written above. Improvisation is implied and this system is used for jazz and popular music. See Berklee College of Music.

Letter notation


The notes of the 12-tone scale can be written by their letter names A-G, possibly with a trailing sharp or flat symbol, such as A♯ or B♭. This is the most common way of specifying a note in speech or in written text.

Letter notation is the most common way of indicating chords for accompaniment, such as guitar chords, for example B♭7. The bass note may be specified after a /, for example C/G is a C major chord with a G bass.

Where a capot is indicated, there is little standardisation. For example, after capot 3, most music sheets will write A to indicate a C chord, that is, they give the chord shape rather than its pitch, but some specify it as C, others give two lines, either the C on top and the A on the bottom or vice versa. A few even use the /, writing C/A or A/C, but this notation is more commonly used for specifying a bass note and will confuse most guitarists.

Note names can also be used for indicating keys and even writing out tunes. In all of these uses notes must be named for their diatonic functionality. For example, in the key of D major, it is not generally correct to specify G♭ as a melodic note, although its pitch may be the same as F♯.

Note names are also used for specifying the natural scale of a transposing instrument such as a clarinet, trumpet or saxophone. The note names used are conventional, for example a clarinet is said to be in B♭ or A♭ (the two most common registers), never in A♯ and G♯, while an alto flute is in G.

Note names can also be qualified to indicate the octave in which they are sounded. There are several schemes for this, the most common being scientific pitch notation. Scientific pitch notation is often used to specify the range of an instrument. Again, the names used are arbitrary or conventional.

Tonic Sol-fa is a type of notation using the initial letters of solfege.

ABC Notation

The abc notation is closely related to letter notation, but is intended for representing music in on-line computer databases. Music is entered as formatted ASCII text with an ordinary text editor. In addition to letters, additional characters are used to indicate key signature, durations, slurring, repeats, parts, chords, etc. A variety of programs exist to render this notation as graphical scores on different computer platforms and in different graphics file formats. ABC notation is an international standard, is easy to type, compact in size and can be stored and emailed easily. Many on-line databases of music in ABC format exist on the web.



Solfege is a way of assigning syllables to names of the musical scale. In order, they are today: Do, Re, Mi, Fa, Sol, La, Ti, and Do (for the octave). Another common variation is: Do, Re, Mi, Fa, Sol, La, Si, Do. These functional names of the musical notes were introduced by Guido of Arezzo (c.991 – after 1033) using the beginning syllables of the six lines of the Latin hymn Ut queant laxis. The original sequence was Ut, Re, Mi, Fa, Sol, La. "Ut" became later "Do". See also: solfege, sargam

Numbered notation


The numbered musical notation system, better known as jianpu, meaning "simplified notation" in Chinese, is widely used among the Chinese people and probably some other Asian communities. Numbers 1 to 7 represent the seven notes of the diatonic major scale, and number 0 represents the musical rest. Dots above a note indicate octaves higher, and dots below indicate octaves lower. Underlines of a note or a rest shorten it, while dots and dashes after lengthen it. The system also makes use of many symbols from the standard notation, such as bar lines, time signatures, accidentals, tie and slur, and the expression markings.

Cipher notation

In many cultures, including Chinese (jianpu or gongche), Indonesian (kepatihan), and Indian (sargam), the "sheet music" consists primarily of the numbers, letters or native characters representing notes in order. Those different systems are collectively know as cipher notations. The numbered notation is an example, so are letter notation and solfege if written in musical sequence.

Braille music


Braille music is a complete, well developed, and internationally accepted musical notation system that has symbols and notational conventions quite independent of print music notation. It is linear in nature, similar to a printed language and different from the two-dimensional nature of standard printed music notation. To a degree Braille music resembles musical markup languages such as XML for Music or NIFF. See Braille music.

Integer notation

In integer notation, or the integer model of pitch, all pitch classes and intervals between pitch classes are designated using the numbers 0 through 11. It is not used to notate music for performance, but is a common analytical and compositional tool when working with chromatic music, including twelve tone, serial, or otherwise atonal music. Pitch classes can be notated in this way by assigning the number 0 to some note - C natural by convention - and assigning consecutive integers to consecutive semitones; so if 0 is C natural, 1 is C sharp, 2 is D natural and so on up to 11 which is B natural. (See pitch class.) The C above this is not 12, but 0 again (12-12=0). Thus arithmatic modulo 12 is used to represent octave equivalence. One advantage of this system is that it ignores the "spelling" of notes (B sharp, C natural and D double-flat are all 0) according to their diatonic functionality.

There are a few drawbacks with integer notation. First, theorists have traditionally used the same integers to indicate elements of different tuning systems. Thus, the numbers 0, 1, 2, ... 5, are used to notate pitch classes in 6-tone equal temperament. This means that the meaning of a given integer changes with the underlying tuning system: "1" can refer to C# in 12-tone equal temperament, but D in 6-tone equal temperament. Second, integer notation does not seem to allow for the notation of microtones, or notes not belonging to the underlying equal division of the octave. For these reasons, some theorists have recently advocated using rational numbers to represent pitches and pitch classes, in a way that is not dependent on any underlying division of the octave. See the articles on pitch and pitch class for more information.

Another drawback with integer notation is that the same numbers are used to represent both pitches and intervals. For example, the number 4 serves both as a label for the pitch class E (if C=0) and as a label for the distance between the pitch classes D and F#. (In much the same way, the term "10 degrees" can function as a label both for a temperature, and for the distance between two temperature.) Only one of these labelings is sensitive to the (arbitrary) choice of pitch class 0. For example, if one makes a different choice about which pitch class is labeled 0, then the pitch class E will no longer be labelled "4." However, the distance between D and F# will still be assigned the number 4. The late music theorist David Lewin was particularly sensitive to the confusions that this can cause.



Tablature was first used in the Renaissance for lute music. A staff is used, but instead of pitch values, the fret or frets to be fingered are written instead. Rhythm is written separately and durations are relative and indicated by horizontal space between notes. In later periods, lute and guitar music was written with standard notation. Tablature caught interest again in the late 20th century for popular guitar music and other fretted instruments, being easy to transcribe and share over the internet in ASCII format. Websites like have archives of text-based popular music tablature.

Klavar notation


Klavar notation is a chromatic system of notation geared toward keyboard instruments, which inverts the usual "graph" of music: the pitches are indicated horizontally, with "staff" lines in twos and threes like the keyboard. and the time goes from top to bottom. A considerable body of repertoire has been transcribed to Klavar notation.

Notation of percussion instruments

Notation conventions for percussionnists is varied because of the atonality of the set of instruments available such as with a drum kit. Excluding tuned instruments such as timpani and those similar to the xylophone, percussion is usually notated on a standard notation staff, with different notes on the staff, and sometimes the style of notehead, representing different instruments. Percussive notation once commonly employed the bass clef, but a neutral staff of two parallel vertical lines is usually preferred now. It is usual to label each instrument and technique mark the first time it is introduced, or to add an explanatory footnote, on any score to clarify this. Below is an example of a common notation convention for the drum kit.


Image:Drumkit notation drums.png


Image:Drumkit notation cymbals.png


(Note: notation in this image is incorrect; see accompanying text for description of correct notation)

Image:Drumkit notation others.png

Mounted triangle: leger-line high C with "X" replacing notehead. Maraca: high-B with "+" replacing notehead. Mounted tambourine: high-B with "X" through conventional notehead.


Image:Drumkit notation techniques.png

Rim click 
striking the rim of the snare drum with the butt of the stick while the tip is held against the drum head(also known as side stick or cross stick)
Stick shot 
hitting one stick, held with its tip against snare head, with the other stick
Brush sweep 
sweeping the snare head with a brush (also known as "stirring soup")

Dynamic accents

Image:Drumkit notation accents.png


  1. slightly softer than surrounding notes: u (breve)
  2. significantly softer than surrounding notes: ( ) (note head in parentheses)
  3. much softer than surrounding notes: [ ] (note head in brackets)

Graphic notation


The term 'graphic notation' refers to the contemporary use of non-traditional symbols and text to convey information about the performance of a piece of music. It is used for experimental music, which in many cases is difficult to transcribe in standard notation. Practitioners include Christian Wolff, Earle Brown, John Cage, Morton Feldman, Krzysztof Penderecki, Cornelius Cardew, and Roger Reynolds. See Notations, edited by John Cage and Alison Knowles, ISBN 0685148645.

Parsons code


Parsons code is used to encode music so that it can be easily searched. This style is designed to be used by individuals without any musical background.

Systems not based on the standard 12-tone scale

Other systems exist for non twelve tone equal temperament and non-Western music, such as the Indian svar lippi. Some cultures use their own cipher notations for those music. In ancient Byzantium and Russia sacred music was notated with special 'hooks and banners' (see znamennoe singing).Sometimes the pitches of music written in just intonation are notated with the frequency ratios, while Ben Johnston has devised a system for representing just intonation with traditional western notation and the addition of accidentals which indicate the cents a pitch is to be lowered or raised.

Alternative Music Notations that Use Chromatic Staves

Over the past three centuries hundreds of music notation systems have been proposed as alternatives to traditional western music notation. A large number of these notations seek to improve upon traditional notation (TN) by using a "chromatic staff" in which each of the 12 pitch classes has its own unique place on the staff. Examples are the Ailler-Brennink notation and John Keller's Express Stave. These notations do not require key signatures, or sharp, flat and natural signs. They also represent interval relationships more consistently and accurately than traditional notation. The Music Notation Modernization Association has a website with information on (and links to) many of these alternative notations (ANs).

See also


External links

Template:Musical notation Template:Book Template:Metaid:Notasi musik cs:Notace de:Notation (Musik) Template:Link FA fr:Notation musicale he:קטגוריה:סימן מוזיקלי it:Semiografia musicale ko:기보법 nl:Muzieknotatie ja:記譜法 pl:Notacja muzyczna pt:Notação musicalTemplate:Link FA sl:Notni zapis sv:Notskrift