Red Line (Chicago Transit Authority)
From Free net encyclopedia
Template:Chicago L The Red Line (Howard-Dan Ryan) is a heavy rail line in Chicago, run by the Chicago Transit Authority (CTA) as part of the Chicago 'L' system. It is CTA's busiest rail line, serving more than 190,000 passengers each weekday, 23.4 miles long with 37 stations, from Rogers Park on the City Limits north, through downtown Chicago, and to Roseland on the south.
Contents |
Operation
Image:Berwyn CTA 031130.jpg The northern terminus of the route is Howard Street in the Rogers Park neighborhood of Chicago (7600 north - 1700 west), on the City limits farthest north. The Red Line extends southeasterly on an elevated embankment structure about a half-mile west of the lakefront to Touhy Avenue then turns south along Glenwood Avenue to Morse station. From there the route swings on a reverse curve to the east to Sheridan Road, adjacent to Loyola University Chicago and continues southerly parallel to Broadway Avenue to the east and follows Broadway to Leland Avenue. From here, the route transitions from concrete embankment to steel elevated structure. The 'L' continues southward running adjacent the Graceland Cemetery, Irving Park Road and Sheffield Avenue from Uptown to Lincoln Park. The Brown Line (Ravenswood) joins the Red Line tracks just north of the Belmont Avenue station. Image:Ctasubway.jpg South of Belmont, Red and Brown Line trains run side-by-side on the four track North Side 'L' to Armitage Avenue. At Armitage, the Red Line descends to a portal at Willow Street and becomes a subway route, turning southeast in Clybourn Avenue, east in Division Street, and south in State Street through the Loop to Roosevelt Road.
South of Roosevelt Road, the subway swings away from State Street on a reverse curve to the west and south then rises to another portal near 18th Street adjacent Metra's Rock Island commuter railroad line. The Red Line bridges 18th Street and continues southward on a steel column pan concrete deck elevated structure to 24th Street. The Cermak-Chinatown station is in this section. Image:CTA-Cermak.jpg South of Cermak Road, the Red Line tracks run along the median strip of the Franklin Street Connector, the planned, but never-completed downtown feeder branch of the Dan Ryan Expressway. The Red Line then tunnels beneath the expressway interchange at 29th Street and continues southward now occupying the median strip of the Dan Ryan Expressway (Interstate 90 & 94). The Red Line follows the Dan Ryan the rest of the way to the 95th Street terminal (9500 south - 1 west) in Roseland. The 98th Street yard and inspection facilities lie just south and east of the Dan Ryan-Bishop Ford Expressway interchange. Beyond the interchange, the Dan Ryan and Bishop Ford expressways continue south without a transit line in the median strip, but with a grass median occupying space where provisions were made (when they were being built) for future rapid transit extensions of the Red Line.
Stations along the Red Line serve important Chicago landmarks such as Wrigley Field (Addison), U.S. Cellular Field (Sox-35th), DePaul University (Fullerton), the Auditorium Building of Roosevelt University, and Loyola University Chicago (Loyola), as well as the Magnificent Mile and Chinatown.
From the Red Line, passengers can directly transfer to any other Chicago 'L' line.
Like the Blue Line, the Red Line runs 24 hours a day. Service has a 4 to 6 minute headway during the day, and a 15 minute headway during the early morning hours.
History
The Red Line began on the north side with the first section of the route opening on May 31, 1900 between Wilson and Broadway Avenues and the Loop. It was constructed by the Northwestern Elevated Railroad Company. The route was extended to Central Street in Evanston on May 16, 1908 via leased and electrified steam railroad trackage, and to Linden Avenue in Wilmette on April 2, 1912. In November, 1913, the North Side 'L' was through routed with the South Side 'L' lines through the Union Loop. The ground-level section between Leland Avenue and Howard Street was elevated on a concrete embankment structure and expanded to four tracks in 1922.
The Clybourn-Division-State Subway was completed in 1943 providing two new tracks bypassing the portion of the North and South Side 'L' lines not equipped express tracks. By providing an express route free of the most restrictive curves on the Chicago 'L' and shorter than the old line it supplemented (thanks to use of a diagonal street, Clybourn Avenue, for one leg of the route), the subway reduced running time by as much as 11 minutes for a one-way trip. The route was placed in operation October 17, 1943, for a portion of the through north-south trains although other trains continued to use the 'L' both on through trips and on services circling the Loop and returning to the point of origin.
On July 31, 1949, the North-South route was revised to create a more efficient routing through the Central Business District and handle the heavy volumes of passenger traffic using it. Thus, the Howard line was combined with the Jackson Park-Englewood lines through the State Street Subway, and the other lines routed to the Loop 'L'.
The Dan Ryan Branch was opened September 28, 1969, and was originally combined with the Lake Street line to form the West-South route (Lake-Dan Ryan). It operated over the Lake Street and Wabash Avenue sides of the Union Loop. This "interim" system was created mainly for the purpose of providing through service between the west side and the south side in anticipation of the 1968 Chicago Central Area Transit Plan (Loop and Distributor Subway project). The Lake-Dan Ryan route would last for about 23 years.
For much of the twenieth century, the Howard-Englewood/Jackson Park route was equally compatible in terms of passenger traffic until the late 1960's through the 1970's. However, passenger traffic volumes began to shift on the south side lines, with more riders using the newer Dan Ryan line (which runs four miles further south) and fewer riders on the older 'L' lines. This imbalance of service allowed the CTA to develop a more efficient system by combining the more heavily used rail lines together, and the weaker lines with each other, providing increased service capacity for the routes that need it. Thus, on February 21, 1993 the Howard line was combined with the Dan Ryan line creating the present Red Line, and the Lake Street line was paired with the Englewood-Jackson Park lines to form the Green Line. A further operational benefit of this switch was that there was now additional available capacity on the Loop 'L', which was required for the soon-to-open Orange Line.
The Dan Ryan branch of the Red Line is currently undergoing a rehabilitation period to improve its aging infratsructure and should be completed by late 2006 or 2007. [1] This work includes upgrading the power and signal systems, and rehabilitating the stations with improved lighting, a cleaner appearance, and new escalators and elevators.
Planning is currently underway for an extension southward from the 95th street terminal to 130th and the Bishop Ford Freeway. This would also connect the Red Line to the South Shore Rail Line.[2][3][4]
