Tetrahedron
From Free net encyclopedia
- For the academic journal, see Tetrahedron
A tetrahedron (plural: tetrahedra) is a polyhedron composed of four triangular faces, three of which meet at each vertex. A regular tetrahedron is one in which the four triangles are regular, or "equilateral," and is one of the Platonic solids.
Contents |
Like all convex polyhedra, a tetrahedron can be folded from a single sheet of paper.
Area and volume
The area A and the volume V of a regular tetrahedron of edge length a are:
- <math>A=\sqrt{3}a^2</math>
- <math>V=\begin{matrix}{1\over12}\end{matrix}\sqrt{2}a^3</math>
The height is <math>h=(a/3) \sqrt{6}</math>, the angle between an edge and a face is arctan <math>\sqrt{2}</math> (ca. 55°), and between two faces arccos (1/3) = arctan <math>2\sqrt{2}</math> (ca. 71°). Note that with respect to the base plane the slope of a face is twice that of an edge, corresponding to the fact that the horizontal distance covered from the base to the apex along an edge is twice that in a face, from the midpoint at the base.
Like for any pyramid, the volume is <math>V = \frac{1}{3} Ah</math> where A is the area of the base and h the height from the base to the apex. This applies for each of the four choices of the base, so the distances from the apexes to the opposite faces are inversely proportional to the areas of these faces.
Also, for a tetrahedron ABCT the volume is given by
<math>V = \frac {AT \cdot BT \cdot CT}{6} \cdot \sqrt {1 + 2 \cdot \cos a \cdot \cos b \cdot \cos c - \cos^2 a - \cos^2 b - \cos^2 c}</math>
where a is angle ATB, b angle BTC, and c angle CTA.
For the distance between edges, see skew line.
The volume of any tetrahedron, given its vertices a, b, c and d, is (1/6)·|det(a−b, b−c, c−d)|, or any other combination of pairs of vertices that form a simply connected graph.
Geometric relations
A tetrahedron is a 3-simplex. Unlike in the case of other Platonic solids, all vertices of a regular tetrahedron are equidistant from each other (they are in the only possible arrangement of four equidistant points).
A tetrahedron is a triangular pyramid, and the regular tetrahedron is self-dual.
A regular tetrahedron can be embedded inside a cube in two ways such that each vertex is a vertex of the cube, and each edge is a diagonal of one of the cube's faces. For one such embedding, the Cartesian coordinates of the vertices are
- (1, 1, 1);
- (−1, −1, 1);
- (−1, 1, −1);
- (1, −1, −1).
For the other tetrahedron (which is dual to the first), reverse all the signs. The volume of this tetrahedron is 1/3 the volume of the cube. Combining both tetrahedra gives a regular polyhedral compound called the stella octangula, whose interior is an octahedron. Correspondingly, a regular octahedron is the result of cutting off, from a regular tetrahedron, four regular tetrahedra of half the linear size (i.e., rectifying the tetrahedron).
Inscribing tetrahedra inside the regular compound of five cubes gives two more regular compounds, containing five and ten tetrahedra.
Regular tetrahedra cannot tile space by themselves, although it seems likely enough that Aristotle reported it was possible. However, two regular tetrahedra can be combined with an octahedron, giving a rhombohedron which can tile space. This is one of the five Andreini tessellations, and is a limiting case of another, a tiling involving tetrahedra and truncated tetrahedra.
However, there is at least one irregular tetrahedron of which copies can tile space. If one relaxes the requirement that the tetrahedra be all the same shape, one can tile space using only tetrahedra in various ways. For example, one can divide an octahedron into four identical tetrahedra and combine them again with two regular ones. (As a side-note: these two kinds of tetrahedron have the same volume.)
The tetrahedron is unique among the Platonic solids in possessing no parallel faces.
Related polyhedra
 Truncated tetrahedron |
 Two tetrahedra in a cube |
 Five tetrahedra |
 Ten tetrahedra |
Intersecting tetrahedra
An interesting polyhedron can be constructed from five intersecting tetrahedra. This compound of five tetrahedra has been known for hundreds of years. It comes up regularly in the world of origami. Joining the twenty vertices would form a regular dodecahedron. There are both left-handed and right-handed forms which are mirror images of each other.
The isometries of the regular tetrahedron
Image:Symmetries of the tetrahedron.png
The vertices of a cube can be grouped into two groups of four, each forming a regular tetrahedron (see above, and also animation, showing one of the two tetrahedra in the cube). The symmetries of a regular tetrahedron correspond to half of those of a cube: those which map the tetrahedrons to themselves, and not to each other.
The tetrahedron is the only Platonic solid that is not mapped to itself by point inversion.
The regular tetrahedron has 24 isometries, forming the symmetry group Td, isomorphic to S4. They can be categorized as follows:
- T, isomorphic to alternating group A4 (the identity and 11 proper rotations) with the following conjugacy classes (in parentheses are given the permutations of the vertices, or correspondingly, the faces, and the unit quaternion representation):
- identity (identity; 1)
- rotation about an axis through a vertex, perpendicular to the opposite plane, by an angle of ±120°: 4 axes, 2 per axis, together 8 ((1 2 3), etc.; (1±i±j±k)/2)
- rotation by an angle of 180° such that an edge maps to the opposite edge: 3 ((1 2)(3 4), etc.; i,j,k)
- reflections in a plane perpendicular to an edge: 6
- reflections in a plane combined with 90° rotation about an axis perpendicular to the plane: 3 axes, 2 per axis, together 6; equivalently, they are 90° rotations combined with inversion (x is mapped to −x): the rotations correspond to those of the cube about face-to-face axes
The isometries of irregular tetrahedra
An irregular tetrahedron (3-sided Pyramid (geometry)) with equilateral base and the top vertex above the center has 6 isometries, like an equilateral triangle.
A tetrahedron composed of two pairs of identical isoceles triangles is such that the two edges that adjoin identical triangles are opposite and perpendicular, and thus such a tetrahedron (or digonal disphenoid) has one twofold rotational axis passing through the centers of the two edges that adjoin identical triangles (in the case where all four triangles are identical and the figure is a tetragonal disphenoid this is also a fourfold improper rotational axis); there are also two mirror planes, each passing through one of these two edges and extending through the center of the opposite edge.
In other cases there is no rotational symmetry and at most one mirror plane.
Computational uses
Complex shapes are often broken down into a mesh of irregular tetrahedra in preparation for finite element analysis and computational fluid dynamics studies.
Trivia
If each edge of a tetrahedron were to be replaced by a one ohm resistor, the resistance between any two vertices would be 1/2 ohm.
Especially in roleplaying, this solid is known as a d4, one of the more common Polyhedral dice.
The tetrahedron represents the classical element fire.
See also
- Spinning tetrahedron
- caltrop
- tetrahedral kite
- triangular dipyramid - constructed by joining two tetrahedra along one face
- tetrahedral number
- Tetra-Pak
External links
- The Uniform Polyhedra
- A Spinning Tetrahedron
- Virtual Reality Polyhedra The Encyclopedia of Polyhedra
- Paper Models of Polyhedra Many links
- An Amazing, Space Filling, Non-regular Tetrahedron that also includes a description of a "rotating ring of tetrahedra", also known as a kaleidocycle.ca:Tetràedre
da:Tetraeder de:Tetraeder es:Tetraedro eo:Kvaredro eu:Tetraedro fr:Tétraèdre ko:사면체 it:Tetraedro he:ארבעון nl:Viervlak ja:三角錐 lt:Tetraedras no:Tetraeder pl:Czworościan pt:Tetraedro ru:Тетраэдр simple:Tetrahedron sl:Tetraeder fi:Tetraedri sv:Tetraeder zh:正四面體