Boeing 787
From Free net encyclopedia
Image:NW Boeing 787.jpg The Boeing 787, or Dreamliner, is a mid-sized wide body passenger airliner currently under development by Boeing Commercial Airplanes and scheduled to enter service in 2008. It will carry between 200 and 350 passengers depending on the seating configuration, and will be more fuel-efficient than comparable earlier airliners. In addition, it will be the first major airliner to use composite material in the majority of its construction.
Prior to January 28, 2005, the 787 was known as the developmental designator 7E7. On April 26, 2005, one year to the day after the launch of the program, the final look of the external 787 design was frozen [1]. With a less rakish nose and a more conventional tail, the final design has superior aerodynamics as compared to the initial 7E7 concept.
Contents |
Background
Image:Boeing sonic.jpg When 767 sales began to weaken in the face of competition from the Airbus A330-200 in the late 1990s, Boeing began to consider replacement aircraft. As the Boeing 747-400 was also beginning to lose traction, the company proposed two new aircraft — the Boeing Sonic Cruiser and the 747X. The Sonic Cruiser was intended to achieve higher speeds (approximately Mach 0.98) while burning fuel at the same rate as the existing 767 and A330 products. The 747X, intended to compete with the Airbus A380, would stretch the 747-400 and give it a composite supercritical wing to improve efficiency. The limited potential market for superjumbos was an issue, however; the earlier Douglas DC-10 and Lockheed L-1011 widebodies split a similarly limited market and drove both companies out of their strong positions in the commercial aircraft market.
Market interest for the 747X was tepid; the Sonic Cruiser had brighter prospects. Several major airlines, primarily in the United States, voiced their optimism for the concept. By decreasing travel time, they would be able to increase customer satisfaction and aircraft utilization.
In the aftermath of the September 11, 2001 attacks, the global airline market was upended. Airlines were not able to justify large capital expenditures, and due to increased petroleum prices, were more interested in efficiency than speed. The worst-affected airlines were in the United States — those same airlines were considered to be the most likely customer of the Sonic Cruiser. Boeing proceeded to offer airlines the option of using the airframe for either higher speed or increased efficiency. Due to high projected airframe costs, demand continued to evaporate. Eventually, Boeing switched tracks and decided to offer an alternative project, cancelling the 747X once Airbus launched production of the Airbus A380 aircraft.
Image:ANA-7E7.jpg The replacement for the Sonic Cruiser project was dubbed the 7E7 (with a development code name of Y2.) The "E" was said to stand for various things, depending upon the audience. To some, it stood for "efficiency," to others it stood for "environmentally friendly," etc. In the end, Boeing claimed it merely stood for "Eight," after the aircraft was eventually rechristened "787" when several Chinese airlines ordered the product, Eight is a lucky number in many Asian cultures, and it was thought by some that Boeing seized upon this coincidence as a marketing tool. [2]
The 787 essentially uses the technology proposed for the Sonic Cruiser in a more conventional airframe configuration (see Features). Boeing claims that the 787 will be up to 20% more fuel-efficient than current comparable aircraft. Roughly one-third of this efficiency improvement will come from the engines; another third from aerodynamic improvements and the increased use of lighter weight composite materials; and the rest from advanced systems. The most notable system advancement contributing to efficiency is a "more electric architecture" which replaces bleed air and hydraulic power with electrically powered compressors and pumps. Technology from the Sonic Cruiser and 787 will be used as part of Boeing's project to replace their entire airliner product line, Yellowstone (of which the 787 is the first stage).
On December 16, 2003, Boeing announced assembly would take place in Everett, Washington, employing 800 to 1,200 people.
On April 6, 2004, Boeing announced that it had selected two engine types, the General Electric (GE) GEnx and Rolls-Royce Trent 1000 to power the 787. Significantly, this leaves Pratt & Whitney unable to offer one of their own engines to 787 customers. Boeing may have wished to rely on two evolved versions of existing engines rather than the higher-risk option of an all new Pratt & Whitney engine, particularly in light of Pratt & Whitney's recent failures in the Regional Jet market and failed PW6000 engine for the A318. For the first time in commercial aviation, both engine types will have a standard interface with the aircraft, allowing any 787 to be fitted with either a GE or Rolls-Royce engine at any time. Engine interchangeability makes the 787 a far more flexible asset to airlines, allowing them to change from one manufacturer's engine to the other's in light of any future engine developments which conform more closely to their operating profile. The engine market for the 787 is estimated at $40 billion USD over the next 25 years.
The launch of a new airliner can be expected to draw scathing comments from competitors, Boeing's doubt over the A380 and Airbus' mocking of the Sonic Cruiser being recent examples. The 787 is no exception, as Airbus' John Leahy has made attempts at refuting all of Boeing's claims, openly criticizing the large-scale use of composites in the 787's fuselage as being "rushed and ridiculous", ignoring the fact that Boeing built and tested the first composite section while examining the Sonic Cruiser concept nearly 5 years ago [3] making the 787 a significantly refined product [4]. Airbus recently offered the competing A350 using derivatives of the turbofans developed for the 787, modified to generate bleed air. This new jet will make less widespread use of composites with Airbus preferring aluminium-lithium alloys for the fuselage [5]. As of October 132005 the A350 had 143 commitments from various airline companies, however it was recently announced that the A350 would not be available until 2011, three years after the 787 will be in service.
In order to compete with the larger version of the Airbus A350, and especially to compete for the large order from Emirates and an order from British Airways, Boeing has announced it will produce a "787-10", with seating capacity between 290 - 310. [6] This has been reported in numerous articles [7], including on ATW Online's daily news [8]. Production of this new model is projected for 2012.
Commercial launch
On April 26, 2004, the Japanese airline All Nippon Airways (ANA) became the launch customer for the 787, then still-known as the 7E7, announcing a firm order for 50 aircraft to be delivered beginning in 2008. ANA's order was for thirty 787-3, 300 seat, one-class domestic aircraft, and twenty 787-8, long-haul, 230 seat, two-class aircraft for international routes such as Tokyo Narita-Los Angeles. The aircraft will allow new routes to be opened to minor cities not previously served, such as Denver and Montreal.
Later orders and options are as follows.
Orders and options
Entries shaded in pink have been announced, but have not yet signed a firm contract.
* Continental Airlines has 7 firm and 3 pending.
** Indicates an exercised option or purchase right
*** Air Seychelles will lease 2 units from ILFC in the 2010
Initial sales
Customer announced orders and commitments for the 787 reached 237 aircraft during the first year of sales. This makes the 787 the fastest-ever selling airliner upon launch; by comparison, the 747 sold 92 units during the same time period. Boeing expects to have 500 orders by entry into service (EIS).
The 787-3 and 787-8 variants will be available first. The 787-9 was expected to be available two years later, but the first 2.5 years production has now been sold out for the initial variants, so the introduction of the 787-9 has been delayed in order to fulfill initial demand. As of April 1, 2006, three airlines had already ordered a total of 39 Boeing 787-9.
The 787-8 variant was priced at a list price of $120 million per aircraft, surprising the industry, which was expecting a much higher price tag. Like launch customers of past aircraft, ANA is rumored to have received a significant discount. This may never be easily confirmed, but the practice is very common in the aviation industry.
Manufacturing partners
Image:Boeing 747-400LCF 2.jpg Boeing will assemble the aircraft and manufacture its forward fuselage, tail fin, ailerons, flaps, and slats. For its entire history, Boeing has jealously guarded its techniques for designing and mass producing commercial jetliner wings. Due to economic realities, the wings will be manufactured by Japanese companies in Nagoya, while the horizontal stabilizers will be manufactured by Alenia Aeronautica in Italy, and the fuselage sections by Vought in South Carolina, Alenia in Italy, Kawasaki in Japan, and Spirit AeroSystems, in Wichita. <ref name="seatimes_20050911">"Boeing 787: Parts from around world will be swiftly integrated", The Seattle Times, September 11, 2005.</ref>
Japanese industrial participation is very important to the project, with 35% workshare, with many of the subcontractors supported and funded by the Japanese government. The Japanese participants are no longer junior partners.
From France, Messier-Dowty will build the landing gear and Thales will supply the integrated standby flight display, electrical power conversion system, and in-flight entertainment.
Honeywell and Rockwell-Collins will provide flight control, guidance and other avionics systems, including standard dual head up guidance systems. Future integration of forward looking infrared is being looked at by Flight Dynamics allowing improved visibility using thermal sensing as part of the HUD system, allowing pilots to "see" through the clouds.
Image:B787 Section 41.jpg The final assembly will consist of attaching fully-completed subassemblies, instead of building the complete aircraft from the ground up. This is a technique which Boeing has previously used on the 737 program, which involves shipping fuselage barrel sections by rail from Spirit's Wichita, Kansas facility to Boeing's final assembly plant at Renton, Washington. Airbus has also used this technique in the past, although in its case it is more of a political necessity resulting from partner nations' divided workshare.
The 787 will undergo wind-tunnel testing at Boeing's Transonic Wind Tunnel, QinetiQ's five-meter wind tunnel based in Farnborough, UK, and NASA Ames Research Center's wind tunnel, as well as at the French aerodynamics research agency, ONERA.
The first composite section rolled out in January of 2005, and final external design was set in April 2005.
Current Sales Information April/ May 2006
Currently, Boeing is in talks with several international carriers. Singapore Airlines and Emirates Airlines have shown an interest in the new 787s, and have been courting Boeing and Airbus for some time. Emirates recently, has been pushing Boeing to further stretch the Dreamliner for a Dash 10 model. A decision is expected at the upcoming airshow. While the A350 is lagging behind in orders, it has provided formidable competition to the 787, forcing the Dreamliner sales team to work very hard to win new orders.
Additional orders, later on are expected from Air New Zealand, Continental Airlines and Northwest Airlines - as their current fleets consist mainly of 767 and A330 aircraft which will be retiring in the next decade. Currently Boeing has proposals for more than 600 aircraft; not all will turn into firm orders, but Boeing hopes to retain more than a 60% share in this market. Boeing is well on its way to achieving its goal of 500 firm orders before entry into service.
Other prospective customers for the 787 include:
- Aeroflot
- Aerolineas Argentinas
- Aeromexico
- Aer Lingus
- Air Pacific
- Alitalia
- American Airlines
- Asiana Airlines
- Avianca
- British Airways
- Cathay Pacific
- China Airlines
- Delta Air Lines
- EL AL
- Emirates Airlines
- Etihad Airways
- EVA Air
- Flyglobespan
- GECAS
- Gulf Air
- Hawaiian Airlines
- Jet Airways
- KLM
- LAN
- Lufthansa
- Malaysia Airlines
- Pakistan International Airlines
- RBS Aviation
- Saudi Arabian Airlines
- Singapore Airlines
- Thai Airways
- Thomsonfly
- Turkish Airlines
- United Airlines
- Varig
- Viva Macau
- Zoom Airlines
Features
- Twin aisle seating. 18.5" standard seat width in coach in a 2+4+2 arrangement, 17.3" in a 3+3+3 arrangement, 2" arm rests, 4" (at the center section of 2+4+2), standard aisle width of 21.5".
- Cabin interior width at 50" from the floor is 223" (recently increased by 1"), the interior cabin width is a full 15" greater than that of the Airbus A330/A340 and still about a foot wider than the newer A350. Two class configuration of 240 seats in two class domestic with 46" first class pitch and 34" coach class. 296 pax in a high density 2+4+2 coach arrangement with 36" Business and 32" Coach pitch. Up to 224-234 in a three class with 61" Pitch First (2+2+2 or 2+1+2), 39" Pitch Business (2+3+2 or 2+2+2) and 32" Coach (2+4+2).
- Cruise speed: 0.85 Mach (903 km/h or 561 mph at altitude)
- Range of 8,500 nautical miles (15,700 km), enough to cover the Los Angeles to Hong Kong or New York to Tokyo routes.
- Construction materials (by weight): 50 % composite, 20 % aluminum, 15 % titanium, 10 % steel, 5 % other. Composite materials are significantly lighter and stronger than traditional aircraft materials, making the 787 a very light aircraft for its capabilities. By volume, the 787 will be 80 % composite.
- The 787 production line will be able to finish an aircraft in as little as three days, compared to 11 days for the 737.
- Larger windows than any other civil air transport (27cm by 47cm), with a higher eye level, so passengers can see the horizon, with liquid crystal display (LCD)-based "auto-dimming" to reduce cabin glare and maintain transparency. These are to be supplied by PPG[42].
- Light-emitting diode (LED) cabin lighting (three color) will be used instead of fluorescent tubes, allowing the aircraft to be entirely 'bulbless' and have 128 color combinations.
- A version of Ethernet – Avionics Full-Duplex Switched Ethernet (AFDX) / ARINC 664 -- will be used to transmit data between the flight deck and aircraft systems.
- LCD multi-function displays on the flight deck, all of which will use an industry standard GUI widget toolkit (Cockpit Display System Interfaces to User Systems / ARINC 661) [43]
- Bleedless turbofans, allowing elimination of superheated air conduits normally used for de-icing, aircraft power, and other functions. These systems are to be replaced with an all-electrical system.
- Cabin air provided by electrically driven compressors (no engine bleed air).
- Higher humidity in the passenger cabin because of the use of composites (which do not corrode).
- The internal pressure will be increased, to the equivalent of 6000 feet (1800 m) altitude versus 8000 (2400 m) on conventional aircraft. This will significantly improve passenger comfort.
- Boeing is experimenting with several engine noise reducing technologies for the 787. Among these are a redesigned air inlet containing sound-absorbing materials and redesigned exhaust duct covers whose rim is tipped in a toothed pattern to allow for quieter mixing of exhaust and outside air. Boeing expects these developments to make the 787 significantly quieter both inside and outside the passenger cabin.
Early concept images of the 787 included rakish cockpit windows, a dropped nose, and a distinctive "shark-fin" vertical stabilizer. The final styling of the aircraft was more conservative, with the fin less radical than on earlier images, but the nose and cockpit windows were retained. The nose is very similar to that of the Dornier 728Jet.
Variants
The 787 is currently being offered in three variants:
- The 787-3 will be a 296 seat (two class) short-range version targeted at high density flights, with a range of 3,500 nautical miles (6,500 km). EIS is 2010. Boeing is targeting the 787-3 to replace the Airbus A300 and A310, and Boeing 757-300, 767-200, and 767-300. The 787-3 will have no direct counterpart from Airbus.
- The 787-8 will be the baseline model, with 223 seats in three classes and a range of 8,500 nautical miles (15,700 km). EIS is 2008. Boeing is targeting the 787-8 to replace the 767-300ER. The 787-8 will have no direct counterpart from Airbus.
- The 787-9 will be a stretched variant, seating 259 in three classes. The targeted EIS is set at 2010 [44]. Boeing is targeting the 787-9 to replace the Airbus A330-200 and A340-200, Boeing 767-400ER, McDonnell Douglas DC-10, and Lockheed L-1011. Airbus is offering the A350-800 in competition.
In addition, Boeing is studying the 787-10, a stretched variant seating roughly 300 which is intended to compete with the planned Airbus A350-900.<ref name=atw>Template:Cite news</ref> The 787-10 would supersede the 777-200A and 777-200ER in Boeing’s current lineup, and could also be targeted to replace the Airbus A330-300 and A340-300, and McDonnell Douglas MD-11. Emirates Airlines and Qantas have shown interest in such variant which would enter service in 2012.<ref name=baseler>Template:Cite web</ref> This variant has not yet been officially launched by Boeing, but Mike Bair, head of the 787 Program, has already stated that “It's not a matter of if, but when we are going to do it... The 787-10 will be a stretched version of the 787-9 and sacrifice some range to add extra seat and cargo capacity”. <ref name="wsj_20060327">"Boeing to Build Stretch 787 Jet," The Wall Street Journal, March 27, 2006.</ref>
Specifications
787-3 | 787-8 | 787-9 | 787-10 | 757-300 (for comparison) | 767-300ER (for comparison) | 767-400ER (for comparison) | 777-200ER (for comparison) | |
---|---|---|---|---|---|---|---|---|
Length: | 55.5 m | 55.5 m | 63 m | 68.9 m | 54.5 m | 54.9 m | 61.4 m | 63.7 m |
Height: | 16.5 m | 16.5 m | 16.5 m | 16.5 m | 13.6 m | 15.8 m | 16.8 m | 18.5 m |
Wingspan: | 51.6 m | 58.8 m | 60.0 m | 60.0 m | 38 m | 47.6 m | 51.9 m | 60.9 m |
Cross section: | 5.75 m | 5.75 m | 5.75 m | 5.75 m | 3.5 m | 4.70 m | 4.70 m | 5.86 m |
MTOW: | 163,500 kg | 216,500 kg | 244,940 kg | 244,940 kg | 123,600 kg | 186,880 kg | 204,120 kg | 297,560 kg |
Seats: | 290-330 | 210-250 | 250-290 | 300-350 | 243 two class | 218 three class | 245 three class | 301 three class |
Cargo: | 16 tons | 16 tons | 16 tons | ? | 10 tons | |||
Engine: | GE GEnx or RR Trent 1000 | GE GEnx or RR Trent 1000 | GE GEnx or RR Trent 1000 | GE GEnx or RR Trent 1X88-77 | RR RB211-535 or P&W 2037/40/43 | GE CF6-80A2/C2 or P&W PW4062 or RR RB211-524 | GE CF6-80C2 or P&W PW4062 | P&W 4090 or RR Trent 895 or GE GE90-94B |
Cruising speed: | 0.85 Mach | 0.85 Mach | 0.85 Mach | 0.85 Mach | 0.80 Mach | 0.80 Mach | 0.80 Mach | 0.84 Mach |
Range¹: | 6,500 km | 15,700 km | 16,300 km | 15,700 km | 6,287 km | 11,306 km | 10,454 km | 14,316 km |
Maximum fuel: | 124,700 L | 124,700 L | 138,700 L | 145,685 L | 171,160 L | |||
Service ceiling: | 13,000 m | 13,000 m | 13,000 m | 13,000 m | 13,000 m | 13,000 m | 13,000 m | |
EIS: | 2009<ref name="wsj_20060327">filler</ref> | 2008 | 2010 | 4Q2012<ref name="wsj_20060327">filler</ref> | 1999 | 1988 | 2000 | 1997 |
¹ With full load (passengers and cargo), from [45]
The Boeing 787-10's specifications are based from [46]
References
<references/>
External links
- 787 Facts (from BCA)
- Customer list (from BCA)
- BCA order sheet for the 787, does not include announced but unsigned contracts.
- 787 videos.
- Boeing 787 Dreamliner Official Homepage (From Boeing)
- Boeing 787 photos (from BCA)
- A detailed analysis of the 787's business affairs (pdf)
- Aircraft-Info.net - Boeing 787
- ANA info page on 787
- 787 and WTO
- Aerospace-Technology
Related content
Image:AC Boeing 777 and 787.jpg Template:Aircontent
|similar aircraft=
|lists=
|see also=
}}de:Boeing 787 es:Boeing 787 et:Boeing 787 fi:Boeing 787 fr:Boeing 787 he:בואינג 787 id:Boeing 787 io:Boeing 787 ja:ボーイング787 ms:Boeing 787 nl:Boeing 787 no:Boeing 787 pl:Boeing 787 pt:Boeing 787 sr:Боинг 787 sv:Boeing 787 zh:波音787