Pumped-storage hydroelectricity

From Free net encyclopedia

Image:Pumpstor racoon mtn.jpg

Image:Pumpspeicherkraftwerk engl.png

Pumped storage hydroelectricity is a method of storing and producing electricity to supply high peak demands by moving water between reservoirs at different elevations.

Overview

At times of low electrical demand, excess electrical capacity is used to pump water into the higher reservoir. When there is higher demand, water is released back into the lower reservoir through a turbine, generating hydroelectricity. Reversible turbine/generator assemblies act as pump and turbine (usually a francis turbine design). Some facilities use abandoned mines as the lower reservoir, but many use the height difference between two natural bodies of water or artificial reservoirs. Pure pumped-storage plants just shift the water between reservoirs, but combined pump-storage plants also generate their own electricity like conventional hydroelectric plants through natural stream-flow. Plants that do not use pumped-storage are referred to as conventional hydroelectric plants.

Due to evaporation losses from the exposed water surface and mechanical efficiency losses during conversion approximately 70% to 85% of the electrical energy used to pump the water into the elevated reservoir can be regained. The technique is currently the most cost-effective means of storing large amounts of electrical power available to date.

The relatively low energy density of pumped storage systems requires either a very large body of water or a large variation in height. For example, 1000 kilograms of water (1 cubic meter) at the top of a 100 meter tower has a potential energy of about 0.272 kW·h. The only way to store a significant amount of energy is by having a large body of water located on a hill relatively near, but as high as possible above, a second body of water. In some places this occurs naturally, in others one or both bodies of water have been man-made.

This system is economical because it flattens out the variations in the load on the power grid, permitting thermal power stations such as coal-fired plants and nuclear power plants that provide base-load electricity to continue operating at their most efficient capacity while reducing the need to build special power plants which run only at peak demand times using more costly generation methods.

As well as energy management, pumped storage systems are important components in controlling electrical network frequency and in provision of reserve generation. Thermal plants are much less able to respond to sudden changes in electrical demand, which cause frequency and voltage instability. Pumped storage plants, in common with other hydroelectric plants, can respond to those changes within seconds.

Image:Stwlan.dam.750pix.jpg

The first use of pumped storage was in the 1890s in Italy and Switzerland. In the 1930s reversible hydroelectric turbines became available. These turbines could operate as both turbine-generators and in reverse as electric motor driven pumps. The latest in large-scale engineering technology are variable speed machines for greater efficiency. These machines generate in synchronisation with the network frequency, but operate asynchronously (independent of the network frequency) as motor-pumps.

A new concept is wind-pumped water storage where vagaries of wind power can be leveled by using the wind power to fill a reservoir and generate grid power from the reservoir turbines.

In 2000 the United States had 19500 MWe capacity of pumped storage. This produced a net -5500 MWe of power because they consume more power filling their reservoirs than they generate by emptying them.

In 1999 the EU had 32 GW capacity of pumped storage out of a total of 188 GW of hydropower and representing 5.5% of total electrical capacity in the EU.

Worldwide list of pumped storage plants

Australia

• Bendeela, 80 MW
• Jindabyne Pumping Station
• Kangaroo Valley, 160 MW
• Tumut Three, (1973), 1,500 MW
• Wivenhoe Power Station, 500 MW

Bulgaria

• PAVEC Chaira, (1998),800 MW

Canada

• Sir Adam Beck Pump Generating Station, (1957) near Niagara Falls, reversible Deriaz turbines, 174 MW

China

• Guangzhou, (2000), 2,400 MW
• Tianhuangping (2001), 1,800 MW [1]

Czech Republic

• Dlouhé Stráně, (1996), 650 MW
• Dalešice, (1978), 450 MW

Germany

• Goldisthal (2002)1,060 MW
• Markersbach (1981), 1,050 MW

Ireland

• Turlough Hill 292 MW

Italy

• Piastra Edolo (1982), 1,020 MW
• Chiotas (1981), 1,184 MW
• Presenzano (1992), 1,000 MW
• Lago Delio (1971), 1,040 MW

France

• Grand Maison (1997), 1,070 MW
• La Coche, 285 MW
• Le Cheylas, 485 MW
• Mortézic, 920 MW
• Revin, 800 MW
• Super Bissorte, 720 MW

Japan

• Imaichi (1991), 1,050 MW
• Kanagawa (2005), 2,700 MW is under construction. When completed in 2005, it will be the world's largest pumped storage plant.
• Kazunogawa (2001), 1,600 MW
• Kisenyama, 466 MW
• Matanoagawa (1999), 1,200 MW
• Midono, 122 MW
• Niikappu, 200 MW
• Okawachi (1995), 1,280 MW
• Okutataragi (1998), 1,932 MW
• Okuyoshino, 1,206 MW
• Shin-Takasegawa, 1,280 MW
• Shiobara, 900 MW
• Takami, 200 MW
• Tamahara (1986), 1,200 MW
• Yagisawa, 240 MW
• Yanbaru (1999), 30 MW is the first seawater pumped hydro plant.

Poland

• Żarnowiec, 716 MW
• Porąbka-Żar, 500 MW
• Solina, 200 MW
• Żydowo, 150 MW
• Niedzica, 92.6 MW
• Dychów, 79.5 MW

Russia

• Zagorsk (1994) 1,200 MW

Serbia

• Bajina Basta (1966) 364 MW

South Africa

• Drakensberg 1,000 MW
• Palmiet 400 MW

Taiwan

• Minghu (1985) 1,000 MW
• Mingtan (1994) 1,620 MW

United Kingdom

• Ben Cruachan, Scotland (1965), 440 MW
• Dinorwig power station, Wales (1984), 1728 MW (6 x 288MW units)
• Ffestiniog, Wales (1963), 360 MW (4 x 90MW units)
• Foyers, Scotland (1975), 305 MW

United States

• Blenheim-Gilboa, NY (1973), 1,200 MW
• Castaic Dam, CA (1978), 1,566 MW
• Clarence Cannon dam, MO (1983), 58 MW
• Edward C Hyatt, CA (1968), 780 MW
• Gianelli, (San Luis Dam & Pyramid Lake) CA (1968), 400 MW
• Grand Coulee Dam, WA (1981), 314 MW [2]
• Helms, CA (1984), 1,200 MW
• Iowa Hill, CA (Proposed 2010), 400 MW [3]
• John S. Eastwood, CA (1988), 200 MW
• Lewiston (Niagara), NY (1961), 2,880 MW
• Ludington, MI (1973), 1,872 MW
• Mount Elbert, 200 MW, 1,212 MW
• Mt. Hope, 2,000 MW
• Northfield Mountain, MA (1972), 1,080 MW
• Raccoon Mountain, TN (1979), 1,530 MW
• Rocky River, CT (1929), 31 MW
• Seneca Power Plant, PA 435 MW
• Summit Pumped Water Plant, 1500 MW
• Taum Sauk, MO, pure pump-back 450 MW
• Bath County, VA, 420 MW

Other

• Dneister (1996) 2,268 MW
• Kruonis Pumped Storage Plant, Lithuania (1993) Designed - 1,600 MW, installed - 900 MW
• Kühtai, Austria, 250 MW
• Kraftwerksgruppe Fragant, Austria, 100 MW
• Siah Bisheh, Iran, (1996), 1,140 MW
• Rance River, St. Malo, France 240 MW hybrid pumped water-tidal plant
• Drakensberg Pumped Storage Scheme, South Africa, (1983) 1,000 MW.
• Juktan, Sweden
• A plant was planned on Vaarunvuori in Korpilahti, Finland, but environmentalist opposition has killed the project.
• Čierny Váh, Slovakia, 735.16 MW

Salt water (ocean)

• Kunigami Village, Okinawa, Japan [4][5]
• Koko Crater, Oahu, Hawaii [6] (Proposed)

See also

• List of energy topics
• Hydroelectricity
• Hydropower
• Underground power station
• Turbine
• Water turbine
• Francis turbine
• Kaplan turbine
• Grid energy storage

External links

Articles about historical mechanical engineering landmarks from ASME:

• Rocky River Pumped-storage Hydroelectric Plant (1929)
• Hiwassee Dam Unit 2 Reversible Pump-Turbine (1956)de:Pumpspeicherkraftwerk

es:Central hidroeléctrica reversible eo:Pumprezerva akvoenergia centralo he:אנרגיה שאובה ja:揚水発電 nl:Pompcentrale